longranger/esphome
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add fan per thermostat functionlity.

Browse Source
This commit is contained in:
longranger
2021-11-30 17:59:04 -08:00
parent 16231f148d
commit 12724c9695
3 changed files with 268 additions and 149 deletions
Download Patch File Download Diff File Expand all files Collapse all files

186
projector_3.yaml
View File

@@ -1,37 +1,52 @@
substitutions:
duct_fan_pin: GPIO14
duct_fan_id: duct_fan_id
duct_fan_pwmfreq: 5000Hz
duct_fan_spd_id: duct_fan_spd_id
duct_fan_spd_name: pj_3_duct_fan_spd
# heat_pin: GPIO19
# heat_name: "Denon Pwr"
duct_fan_pin: GPIO14
duct_fan_spd_name: Prj3 Duct Fan Speed
duct_fan_spd_target_in_name: Prj3 Duct Fan Target Speed In
duct_fan_spd_target_out_name: Prj3 Duct Fan Target Speed Out
duct_fan_pwmfreq: 5000Hz
duct_fan_off_spd: "0.0"
duct_fan_lo_spd: "10.0"
duct_fan_hi_spd: "100.0"
prjpwr_pin: GPIO19
prjpwr_name: Prj3 Pwr
dallas_pin: GPIO32
dallas_1_addr: "0x1F3C01D0756F0928"
dallas_1_name: pj_3_temp_cold
dallas_2_addr: "0x873C01D0756D4B28"
dallas_2_name: pj_3_temp_prj_exh
dallas_3_addr: "0xA901143295610E28"
dallas_3_name: pj_3_temp_box_exh
dallas_in_addr: "0x1F3C01D0756F0928"
dallas_in_name: Prj3 Temp In
dallas_prj_addr: "0x873C01D0756D4B28"
dallas_prj_name: Prj3 Temp Prj
dallas_out_addr: "0xA901143295610E28"
dallas_out_name: Prj3 Temp Out
dallas_update_interval: 30s
globals:
- id: duct_fan_off_spd
type: float
initial_value: ${duct_fan_off_spd}
- id: duct_fan_lo_spd
type: float
initial_value: ${duct_fan_lo_spd}
- id: duct_fan_hi_spd
type: float
initial_value: ${duct_fan_hi_spd}
esphome:
name: pj_3
name: prj3
platform: ESP32
board: esp32doit-devkit-v1
board: esp32doit-devkit-v1
wifi:
ssid: "kungle-oss"
password: "hcfU8@gG&8Hm"
ssid: "kungle-oss"
password: "hcfU8@gG&8Hm"
fast_connect: true
manual_ip:
static_ip: 192.168.35.192
gateway: 192.168.35.1
subnet: 255.255.255.0
gateway: 192.168.35.1
subnet: 255.255.255.0
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Projector 3 Fallback Hotspot"
ssid: "Prj3 Fallback Hotspot"
password: "xfPfYSP3N0C3"
captive_portal:
@@ -44,63 +59,116 @@ api:
ota:
switch:
- platform: template
name: Thermostat On
id: thermostat_on_id
optimistic: true
output:
- platform: ledc
pin: ${duct_fan_pin}
id: ${duct_fan_id}
id: duct_fan_output_id
frequency: ${duct_fan_pwmfreq}
fan:
- platform: speed
id: ${duct_fan_spd_id}
output: ${duct_fan_id}
id: duct_fan_spd_id
output: duct_fan_output_id
name: ${duct_fan_spd_name}
# speed:
# low: 0.2
# medium: 0.6
# high: 1.0
dallas:
- pin:
number: ${dallas_pin}
mode: INPUT_PULLUP
update_interval: 10s
update_interval: ${dallas_update_interval}
sensor:
- platform: dallas
address: ${dallas_1_addr}
name: ${dallas_1_name}
address: ${dallas_in_addr}
name: ${dallas_in_name}
id: dallas_in_id
- platform: dallas
address: ${dallas_2_addr}
name: ${dallas_2_name}
address: ${dallas_prj_addr}
name: ${dallas_prj_name}
id: dallas_prj_id
- platform: dallas
address: ${dallas_3_addr}
name: ${dallas_3_name}
address: ${dallas_out_addr}
name: ${dallas_out_name}
id: dallas_out_id
# # Sense when receiver is turned on
# binary_sensor:
# - platform: gpio
# pin: ${heat_pin}
# name: ${heat_name}
# device_class: power
# # on_press:
# # then:
# # - if:
# # condition:
# # lambda: 'return id(${duct_fan_spd_id}).state == "OFF";'
# # then:
# # - logger.log: "${duct_fan_spd_name} was off. Turning on as ${heat_name} turned on."
# # - fan.turn_on:
# # id: ${duct_fan_spd_id}
# # speed: LOW
# # else:
# # - logger.log: "${heat_name} turned on, but not turning on ${duct_fan_spd_name} as already on."
number:
- platform: template
id: duct_fan_spd_target_in
name: ${duct_fan_spd_target_in_name}
optimistic: true
min_value: ${duct_fan_lo_spd}
max_value: ${duct_fan_hi_spd}
step: 1
- platform: template
id: duct_fan_spd_target_out
name: ${duct_fan_spd_target_out_name}
min_value: ${duct_fan_off_spd}
max_value: ${duct_fan_hi_spd}
step: 1
set_action:
then:
lambda: |-
float lo;
float hi;
float curtemp;
float newspd;
lo = id(thermostat_out_id).target_temperature_low;
hi = id(thermostat_out_id).target_temperature_high;
curtemp = id(dallas_out_id).state;
if ((curtemp < lo) || (id(thermostat_on_id).state == false)) {
auto call = id(duct_fan_spd_id).turn_off();
call.perform();
return id(duct_fan_off_spd);
}
if (curtemp > hi) {
newspd = id(duct_fan_hi_spd);
} else {
// Set newspd to same linear proportion of spd range as current temp is of temp range
newspd = id(duct_fan_lo_spd) + (id(duct_fan_hi_spd) * (curtemp - lo) / (hi - lo));
}
auto call = id(duct_fan_spd_id).turn_on();
call.set_speed(newspd);
call.perform();
return newspd;
# # on_release:
# # then:
# # - fan.turn_on:
# # id: ${duct_fan_spd_id}
# # speed: LOW
# Dual-point thermostat
climate:
- platform: thermostat
id: thermostat_out_id
name: Prj3 Out
sensor: dallas_prj_id
visual:
min_temperature: 60 °F
max_temperature: 160 °F
temperature_step: 1
default_mode: auto
default_target_temperature_low: 75 °F
default_target_temperature_high: 160 °F
min_cooling_off_time: 60s
min_cooling_run_time: 60s
min_heating_off_time: 60s
min_heating_run_time: 60s
min_idle_time: 60s
heat_action:
- logger.log: "Turning off Prj3 Thermostat"
- switch.turn_off: thermostat_on_id
idle_action:
- logger.log: "Turning on Prj3 Thermostat"
- switch.turn_on: thermostat_on_id
cool_action:
- logger.log: "WARNING: Prj3 Thermostat has hit high temp!"
- switch.turn_on: thermostat_on_id
#TODO - provide some kind of warning / action here
# # - lambda: |-
# # if (id(${duct_fan_spd_id}).is_off) {
# Sense when projector is turned on
binary_sensor:
- platform: gpio
pin: ${prjpwr_pin}
name: ${prjpwr_name}
device_class: power

115
rack_2.yaml
View File

@@ -1,8 +1,13 @@
substitutions:
duct_fan_pin: GPIO13
duct_fan_name: Rack 2 Duct Fan Speed
duct_fan_spd_target_in_name: Rack 2 Duct Fan Target Speed In
duct_fan_spd_target_out_name: Rack 2 Duct Fan Target Speed Out
# duct_fan_channel: "0"
duct_fan_pwmfreq: 5000Hz
duct_fan_off_spd: "0.0"
duct_fan_lo_spd: "10.0"
duct_fan_hi_spd: "100.0"
wall_fan_pwr_pin: GPIO21
wall_fan_pwr_name: Rack 2 Wall Fan Power
wall_fan_spd_pin: GPIO22
@@ -14,9 +19,21 @@ substitutions:
wall_fan_tach_name: Rack 2 Wall Fan Tach
dallas_pin: GPIO32
dallas_in_addr: "0x1D02131D6063AA28"
dallas_in_name: Rack 3 Temp In
dallas_in_name: Rack 2 Temp In
dallas_out_addr: "0x1D01143296570128"
dallas_out_name: Rack 3 Temp Out
dallas_out_name: Rack 2 Temp Out
dallas_update_interval: 30s
globals:
- id: duct_fan_off_spd
type: float
initial_value: ${duct_fan_off_spd}
- id: duct_fan_lo_spd
type: float
initial_value: ${duct_fan_lo_spd}
- id: duct_fan_hi_spd
type: float
initial_value: ${duct_fan_hi_spd}
esphome:
name: rack_2
@@ -39,10 +56,23 @@ wifi:
captive_portal:
# Enable logging
logger:
level: DEBUG
# Enable Home Assistant API
api:
ota:
switch:
- platform: gpio
pin: ${wall_fan_pwr_pin}
name: ${wall_fan_pwr_name}
- platform: template
name: Thermostat On
id: thermostat_on_id
optimistic: true
output:
- platform: ledc
@@ -69,7 +99,7 @@ dallas:
- pin:
number: ${dallas_pin}
mode: INPUT_PULLUP
update_interval: 10s
update_interval: ${dallas_update_interval}
sensor:
- platform: pulse_counter
@@ -88,49 +118,51 @@ sensor:
address: ${dallas_out_addr}
name: ${dallas_out_name}
id: dallas_out_id
on_value:
then:
number.set:
id: duct_fan_speed_target_out
value: !lambda |-
float lo;
float hi;
lo = id(thermostat_rack2_out).target_temperature_low;
hi = id(thermostat_rack2_out).target_temperature_high;
if (x < lo) {
return 0.0;
}
if (x > hi) {
return 100.0;
}
return 100 * (x - lo) / (hi - lo);
number:
- platform: template
id: duct_fan_speed_target_in
name: Duct Fan Speed Target In
id: duct_fan_spd_target_in
name: ${duct_fan_spd_target_in_name}
optimistic: true
min_value: 0
max_value: 100
min_value: ${duct_fan_lo_spd}
max_value: ${duct_fan_hi_spd}
step: 1
- platform: template
id: duct_fan_speed_target_out
name: Duct Fan Speed Target Out
optimistic: true
min_value: 0
max_value: 100
id: duct_fan_spd_target_out
name: ${duct_fan_spd_target_out_name}
min_value: ${duct_fan_off_spd}
max_value: ${duct_fan_hi_spd}
step: 1
on_value_range:
above: 25.0
set_action:
then:
fan.turn_on:
id: duct_fan_spd_id
speed: !lambda |-
return x;
lambda: |-
float lo;
float hi;
float curtemp;
float newspd;
lo = id(thermostat_out_id).target_temperature_low;
hi = id(thermostat_out_id).target_temperature_high;
curtemp = id(dallas_out_id).state;
if ((curtemp < lo) || (id(thermostat_on_id).state == false)) {
auto call = id(duct_fan_spd_id).turn_off();
call.perform();
return id(duct_fan_off_spd);
}
if (curtemp > hi) {
newspd = id(duct_fan_hi_spd);
} else {
// Set newspd to same linear proportion of spd range as current temp is of temp range
newspd = id(duct_fan_lo_spd) + (id(duct_fan_hi_spd) * (curtemp - lo) / (hi - lo));
}
auto call = id(duct_fan_spd_id).turn_on();
call.set_speed(newspd);
call.perform();
return newspd;
# Dual-point thermostat
climate:
- platform: thermostat
id: thermostat_rack2_out
id: thermostat_out_id
name: Rack2 Out
sensor: dallas_out_id
visual:
@@ -147,19 +179,12 @@ climate:
min_idle_time: 60s
heat_action:
- logger.log: "Turning off Rack2 Thermostat"
- fan.turn_off:
id: duct_fan_spd_id
- switch.turn_off: thermostat_on_id
idle_action:
- logger.log: "Turning on Rack2 Thermostat"
- switch.turn_on: thermostat_on_id
cool_action:
- logger.log: "WARNING: Rack2 Thermostat has hit high temp!"
- switch.turn_on: thermostat_on_id
#TODO - provide some kind of warning / action here
# Enable logging
logger:
level: DEBUG
# Enable Home Assistant API
api:
ota:

116
rack_3.yaml
View File

@@ -1,7 +1,12 @@
substitutions:
duct_fan_pin: GPIO13
duct_fan_name: Rack 3 Duct Fan Speed
duct_fan_spd_target_in_name: Rack 3 Duct Fan Target Speed In
duct_fan_spd_target_out_name: Rack 3 Duct Fan Target Speed Out
duct_fan_pwmfreq: 5000Hz
duct_fan_spd_name: rack_3_duct_fan_spd
duct_fan_off_spd: "0.0"
duct_fan_lo_spd: "10.0"
duct_fan_hi_spd: "100.0"
amppwr_pin: GPIO19
amppwr_name: "Denon Pwr"
dallas_pin: GPIO32
@@ -9,6 +14,18 @@ substitutions:
dallas_in_name: Rack 3 Temp In
dallas_out_addr: "0xB801143296ED7B28"
dallas_out_name: Rack 3 Temp Out
dallas_update_interval: 30s
globals:
- id: duct_fan_off_spd
type: float
initial_value: ${duct_fan_off_spd}
- id: duct_fan_lo_spd
type: float
initial_value: ${duct_fan_lo_spd}
- id: duct_fan_hi_spd
type: float
initial_value: ${duct_fan_hi_spd}
esphome:
name: rack_3
@@ -31,6 +48,20 @@ wifi:
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
switch:
- platform: template
name: Thermostat On
id: thermostat_on_id
optimistic: true
output:
- platform: ledc
pin: ${duct_fan_pin}
@@ -41,13 +72,13 @@ fan:
- platform: speed
id: duct_fan_spd_id
output: duct_fan_output_id
name: ${duct_fan_spd_name}
name: ${duct_fan_name}
dallas:
- pin:
number: ${dallas_pin}
mode: INPUT_PULLUP
update_interval: 10s
update_interval: ${dallas_update_interval}
sensor:
- platform: dallas
@@ -57,49 +88,51 @@ sensor:
address: ${dallas_out_addr}
name: ${dallas_out_name}
id: dallas_out_id
on_value:
then:
number.set:
id: fan_speed_target_out
value: !lambda |-
float lo;
float hi;
lo = id(thermostat_rack3_out).target_temperature_low;
hi = id(thermostat_rack3_out).target_temperature_high;
if (x < lo) {
return 0.0;
}
if (x > hi) {
return 100.0;
}
return 100 * (x - lo) / (hi - lo);
number:
- platform: template
id: fan_speed_target_in
name: Fan Speed Target In
id: duct_fan_spd_target_in_id
name: ${duct_fan_spd_target_in_name}
optimistic: true
min_value: 0
max_value: 100
min_value: ${duct_fan_lo_spd}
max_value: ${duct_fan_hi_spd}
step: 1
- platform: template
id: fan_speed_target_out
name: Fan Speed Target Out
optimistic: true
min_value: 0
max_value: 100
id: duct_fan_spd_target_out_id
name: ${duct_fan_spd_target_out_name}
min_value: ${duct_fan_lo_spd}
max_value: ${duct_fan_hi_spd}
step: 1
on_value_range:
above: 25.0
set_action:
then:
fan.turn_on:
id: duct_fan_spd_id
speed: !lambda |-
return x;
lambda: |-
float lo;
float hi;
float curtemp;
float newspd;
lo = id(thermostat_out_id).target_temperature_low;
hi = id(thermostat_out_id).target_temperature_high;
curtemp = id(dallas_out_id).state;
if ((curtemp < lo) || (id(thermostat_on_id).state == false)) {
auto call = id(duct_fan_spd_id).turn_off();
call.perform();
return id(duct_fan_off_spd);
}
if (curtemp > hi) {
newspd = id(duct_fan_hi_spd);
} else {
// Set newspd to same linear proportion of spd range as current temp is of temp range
newspd = id(duct_fan_lo_spd) + (id(duct_fan_hi_spd) * (curtemp - lo) / (hi - lo));
}
auto call = id(duct_fan_spd_id).turn_on();
call.set_speed(newspd);
call.perform();
return newspd;
# Dual-point thermostat
climate:
- platform: thermostat
id: thermostat_rack3_out
id: thermostat_out_id
name: Rack3 Out
sensor: dallas_out_id
visual:
@@ -116,12 +149,13 @@ climate:
min_idle_time: 60s
heat_action:
- logger.log: "Turning off Rack3 Thermostat"
- fan.turn_off:
id: duct_fan_spd_id
- switch.turn_off: thermostat_on_id
idle_action:
- logger.log: "Turning on Rack3 Thermostat"
- switch.turn_on: thermostat_on_id
cool_action:
- logger.log: "WARNING: Rack3 Thermostat has hit high temp!"
- switch.turn_on: thermostat_on_id
#TODO - provide some kind of warning / action here
# Sense when receiver is turned on
@@ -130,11 +164,3 @@ binary_sensor:
pin: ${amppwr_pin}
name: ${amppwr_name}
device_class: power
# Enable logging
logger:
# Enable Home Assistant API
api:
ota: