Move Rack 2 - start modularizing it.

_data/rack-2.yaml

@@ -1,26 +1,30 @@
 substitutions:
+  device_name: rack-2
+  dn: rack_2
+  sn: R2
+  friendly_name: Rack 2
   duct_fan_pin: GPIO13
-  duct_fan_name: R2 Duct Fan Spd
+  duct_fan_name: ${sn} Duct Fan Spd
-  duct_fan_tgt_spd_in_name: R2 DF Tgt Spd In
+  duct_fan_tgt_spd_in_name: ${sn} DF Tgt Spd In
-  duct_fan_tgt_spd_out_name: R2 DF Tgt Spd Out
+  duct_fan_tgt_spd_out_name: ${sn} DF Tgt Spd Out
   duct_fan_pwmfreq: 5000Hz
   duct_fan_off_spd: "0.0"
   duct_fan_lo_spd: "1.0"
   duct_fan_vent_spd: "50.0"
   duct_fan_hi_spd: "100.0"
   wall_fan_pwr_pin: GPIO21
-  wall_fan_pwr_name: Rack 2 Wall Fan Power
+  wall_fan_pwr_name: ${friendly_name} Wall Fan Power
   wall_fan_spd_pin: GPIO22
   wall_fan_spd_pwmfreq: 25000Hz
-  wall_fan_spd_name: Rack 2 Wall Fan Speed
+  wall_fan_spd_name: ${friendly_name} Wall Fan Speed
   wall_fan_tach_pin: GPIO23
   wall_fan_tach_id: wall_fan_tach_id
-  wall_fan_tach_name: Rack 2 Wall Fan Tach
+  wall_fan_tach_name: ${friendly_name} Wall Fan Tach
   dallas_pin: GPIO32
   dallas_in_addr: "0x1D02131D6063AA28"
-  dallas_in_name: Rack 2 Temp In
+  dallas_in_name: ${friendly_name} Temp In
   dallas_out_addr: "0x1D01143296570128"
-  dallas_out_name: Rack 2 Temp Out
+  dallas_out_name: ${friendly_name} Temp Out
   dallas_update_interval: 30s
 
 globals:
@@ -37,35 +41,9 @@ globals:
     type: float
     initial_value: ${duct_fan_hi_spd}
 
-esphome:
+<<: !include .common.yaml
-  name: rack_2
+<<: !include .esp32.yaml
-  platform: ESP32
+<<: !include .wifi-oss.yaml
-  board: esp32doit-devkit-v1
-
-wifi:
-  ssid: "kungle-ot"
-  password: "ThingsWelcomeToKungle"
-
-  manual_ip:
-    static_ip: 192.168.37.76
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Server 2 Fallback Hotspot"
-    password: "kRzC55vFjigT"
-
-captive_portal:
-
-# Enable logging
-logger:
-  level: DEBUG
-
-# Enable Home Assistant API
-api:
-
-ota:
 
 switch:
   - platform: gpio
@@ -197,7 +175,7 @@ number:
 climate:
   - platform: thermostat
     id: thermostat_out_id
-    name: Rack2 Out
+    name: ${friendly_name} Out
     sensor: dallas_out_id
     visual:
       min_temperature: 60 °F
@@ -212,13 +190,13 @@ climate:
     min_heating_run_time: 60s
     min_idle_time: 60s
     heat_action:
-      - logger.log: "Turning off Rack2 Thermostat"
+      - logger.log: "Turning off ${friendly_name} Thermostat"
       - switch.turn_off: thermostat_on_id
     idle_action:
-      - logger.log: "Turning on Rack2 Thermostat"
+      - logger.log: "Turning on ${friendly_name} Thermostat"
       - switch.turn_on: thermostat_on_id
     cool_action:
-      - logger.log: "WARNING: Rack2 Thermostat has hit high temp!"
+      - logger.log: "WARNING: ${friendly_name} Thermostat has hit high temp!"
       - switch.turn_on: thermostat_on_id
       #TODO - provide some kind of warning / action here