Functional emp vues. Need to update 1,2.
This commit is contained in:
217
_data/emp-vue2-1.yaml
Normal file
217
_data/emp-vue2-1.yaml
Normal file
@@ -0,0 +1,217 @@
|
||||
substitutions:
|
||||
device_name: emp-vue2-1
|
||||
dn: emp-vue2-1
|
||||
friendly_name: Emporia Vue2 1
|
||||
|
||||
<<: !include .wifi-oss.yaml
|
||||
|
||||
esphome:
|
||||
name: ${device_name}
|
||||
friendly_name: ${friendly_name}
|
||||
|
||||
external_components:
|
||||
- source: github://emporia-vue-local/esphome@dev
|
||||
components:
|
||||
- emporia_vue
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
version: recommended
|
||||
|
||||
# Enable Home Assistant API
|
||||
api:
|
||||
# encryption:
|
||||
# Encryption key is generated by the new device wizard.
|
||||
# key: "<generated_key_from_new_device_wizard>"
|
||||
|
||||
services:
|
||||
- service: play_rtttl
|
||||
variables:
|
||||
song_str: string
|
||||
then:
|
||||
- rtttl.play:
|
||||
rtttl: !lambda 'return song_str;'
|
||||
|
||||
ota:
|
||||
# Create a secure password for pushing OTA updates.
|
||||
# password: "<secure_password>"
|
||||
|
||||
# Enable logging
|
||||
logger:
|
||||
|
||||
preferences:
|
||||
# the default of 1min is far too short--flash chip is rated
|
||||
# for approx 100k writes.
|
||||
flash_write_interval: "48h"
|
||||
|
||||
output:
|
||||
- platform: ledc
|
||||
pin: GPIO12
|
||||
id: buzzer
|
||||
- platform: gpio
|
||||
pin: GPIO27
|
||||
id: buzzer_gnd
|
||||
|
||||
rtttl:
|
||||
output: buzzer
|
||||
on_finished_playback:
|
||||
- logger.log: 'Song ended!'
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: "Two Beeps"
|
||||
on_press:
|
||||
- rtttl.play: "two short:d=4,o=5,b=100:16e6,16e6"
|
||||
|
||||
light:
|
||||
- platform: status_led
|
||||
name: "D3_LED"
|
||||
pin: 23
|
||||
restore_mode: ALWAYS_ON
|
||||
entity_category: config
|
||||
|
||||
i2c:
|
||||
sda: 21
|
||||
scl: 22
|
||||
scan: false
|
||||
frequency: 200kHz # recommended range is 50-200kHz
|
||||
id: i2c_a
|
||||
|
||||
time:
|
||||
- platform: sntp
|
||||
id: my_time
|
||||
|
||||
# these are called references in YAML. They allow you to reuse
|
||||
# this configuration in each sensor, while only defining it once
|
||||
.defaultfilters:
|
||||
- &moving_avg
|
||||
# we capture a new sample every 0.24 seconds, so the time can
|
||||
# be calculated from the number of samples as n * 0.24.
|
||||
sliding_window_moving_average:
|
||||
# we average over the past 2.88 seconds
|
||||
window_size: 12
|
||||
# we push a new value every 1.44 seconds
|
||||
send_every: 6
|
||||
- &invert
|
||||
# invert and filter out any values below 0.
|
||||
lambda: 'return max(-x, 0.0f);'
|
||||
- &pos
|
||||
# filter out any values below 0.
|
||||
lambda: 'return max(x, 0.0f);'
|
||||
- &abs
|
||||
# take the absolute value of the value
|
||||
lambda: 'return abs(x);'
|
||||
|
||||
sensor:
|
||||
- platform: emporia_vue
|
||||
i2c_id: i2c_a
|
||||
phases:
|
||||
- id: phase_a # Verify that this specific phase/leg is connected to correct input wire color on device listed below
|
||||
input: BLACK # Vue device wire color
|
||||
calibration: 0.022 # 0.022 is used as the default as starting point but may need adjusted to ensure accuracy
|
||||
# To calculate new calibration value use the formula <in-use calibration value> * <accurate voltage> / <reporting voltage>
|
||||
voltage:
|
||||
name: "Phase A Voltage"
|
||||
filters: [*moving_avg, *pos]
|
||||
frequency:
|
||||
name: "Phase A Frequency"
|
||||
filters: [*moving_avg, *pos]
|
||||
- id: phase_b # Verify that this specific phase/leg is connected to correct input wire color on device listed below
|
||||
input: RED # Vue device wire color
|
||||
calibration: 0.022 # 0.022 is used as the default as starting point but may need adjusted to ensure accuracy
|
||||
# To calculate new calibration value use the formula <in-use calibration value> * <accurate voltage> / <reporting voltage>
|
||||
voltage:
|
||||
name: "Phase B Voltage"
|
||||
filters: [*moving_avg, *pos]
|
||||
phase_angle:
|
||||
name: "Phase B Phase Angle"
|
||||
filters: [*moving_avg, *pos]
|
||||
ct_clamps:
|
||||
- phase_id: phase_a
|
||||
input: "A" # Verify the CT going to this device input also matches the phase/leg
|
||||
power:
|
||||
name: "Phase A Power"
|
||||
id: phase_a_power
|
||||
filters: [*moving_avg, *pos]
|
||||
- phase_id: phase_b
|
||||
input: "B" # Verify the CT going to this device input also matches the phase/leg
|
||||
power:
|
||||
name: "Phase B Power"
|
||||
id: phase_b_power
|
||||
filters: [*moving_avg, *pos]
|
||||
# Pay close attention to set the phase_id for each breaker by matching it to the phase/leg it connects to in the panel
|
||||
- { phase_id: phase_a, input: "1", power: { name: "Circuit 1 Power", id: cir1, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_b, input: "2", power: { name: "Circuit 2 Power", id: cir2, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "3", power: { name: "Circuit 3 Power", id: cir3, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "4", power: { name: "Circuit 4 Power", id: cir4, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "5", power: { name: "Circuit 5 Power", id: cir5, filters: [ *moving_avg, *pos, multiply: 2 ] } }
|
||||
- { phase_id: phase_a, input: "6", power: { name: "Circuit 6 Power", id: cir6, filters: [ *moving_avg, *pos, multiply: 2 ] } }
|
||||
- { phase_id: phase_a, input: "7", power: { name: "Circuit 7 Power", id: cir7, filters: [ *moving_avg, *pos, multiply: 2 ] } }
|
||||
- { phase_id: phase_b, input: "8", power: { name: "Circuit 8 Power", id: cir8, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_b, input: "9", power: { name: "Circuit 9 Power", id: cir9, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_b, input: "10", power: { name: "Circuit 10 Power", id: cir10, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "11", power: { name: "Circuit 11 Power", id: cir11, filters: [ *moving_avg, *pos, multiply: 2 ] } }
|
||||
- { phase_id: phase_a, input: "12", power: { name: "Circuit 12 Power", id: cir12, filters: [ *moving_avg, *pos, multiply: 2 ] } }
|
||||
- { phase_id: phase_a, input: "13", power: { name: "Circuit 13 Power", id: cir13, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "14", power: { name: "Circuit 14 Power", id: cir14, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_b, input: "15", power: { name: "Circuit 15 Power", id: cir15, filters: [ *moving_avg, *pos ] } }
|
||||
- { phase_id: phase_a, input: "16", power: { name: "Circuit 16 Power", id: cir16, filters: [ *moving_avg, *pos ] } }
|
||||
- platform: template
|
||||
name: "Total Power"
|
||||
lambda: return id(phase_a_power).state + id(phase_b_power).state;
|
||||
update_interval: 2.88s
|
||||
id: total_power
|
||||
device_class: power
|
||||
state_class: measurement
|
||||
unit_of_measurement: "W"
|
||||
- platform: total_daily_energy
|
||||
name: "Total Daily Energy"
|
||||
power_id: total_power
|
||||
accuracy_decimals: 0
|
||||
- platform: template
|
||||
name: "Balance Power"
|
||||
lambda: !lambda |-
|
||||
return max(0.0f, id(total_power).state -
|
||||
id( cir1).state -
|
||||
id( cir2).state -
|
||||
id( cir3).state -
|
||||
id( cir4).state -
|
||||
id( cir5).state -
|
||||
id( cir6).state -
|
||||
id( cir7).state -
|
||||
id( cir8).state -
|
||||
id( cir9).state -
|
||||
id(cir10).state -
|
||||
id(cir11).state -
|
||||
id(cir12).state -
|
||||
id(cir13).state -
|
||||
id(cir14).state -
|
||||
id(cir15).state -
|
||||
id(cir16).state);
|
||||
update_interval: 2.88s
|
||||
id: balance_power
|
||||
device_class: power
|
||||
state_class: measurement
|
||||
unit_of_measurement: "W"
|
||||
- platform: total_daily_energy
|
||||
name: "Balance Daily Energy"
|
||||
power_id: balance_power
|
||||
accuracy_decimals: 0
|
||||
- { power_id: cir1, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 1 Daily Energy" }
|
||||
- { power_id: cir2, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 2 Daily Energy" }
|
||||
- { power_id: cir3, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 3 Daily Energy" }
|
||||
- { power_id: cir4, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 4 Daily Energy" }
|
||||
- { power_id: cir5, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 5 Daily Energy" }
|
||||
- { power_id: cir6, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 6 Daily Energy" }
|
||||
- { power_id: cir7, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 7 Daily Energy" }
|
||||
- { power_id: cir8, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 8 Daily Energy" }
|
||||
- { power_id: cir9, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 9 Daily Energy" }
|
||||
- { power_id: cir10, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 10 Daily Energy" }
|
||||
- { power_id: cir11, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 11 Daily Energy" }
|
||||
- { power_id: cir12, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 12 Daily Energy" }
|
||||
- { power_id: cir13, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 13 Daily Energy" }
|
||||
- { power_id: cir14, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 14 Daily Energy" }
|
||||
- { power_id: cir15, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 15 Daily Energy" }
|
||||
- { power_id: cir16, platform: total_daily_energy, accuracy_decimals: 0, name: "Circuit 16 Daily Energy" }
|
||||
Reference in New Issue
Block a user