From 918bf7e19ac88ba5579a26fc9d32bd53d8081c4c Mon Sep 17 00:00:00 2001
From: longranger <longranger.406@gmail.com>
Date: Sun, 3 Jul 2022 06:28:11 -0700
Subject: [PATCH] Add on_boot. Partial clean up.

---
 _data/rack-2.yaml | 13 +++++++++++--
 _data/rack_3.yaml | 37 +++++++++++++++++++++++++------------
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/_data/rack-2.yaml b/_data/rack-2.yaml
index 1dc13d3..2010164 100644
--- a/_data/rack-2.yaml
+++ b/_data/rack-2.yaml
@@ -42,9 +42,19 @@ globals:
     initial_value: ${duct_fan_hi_spd}
 
 <<: !include .common.yaml
-<<: !include .esp32.yaml
 <<: !include .wifi-oss.yaml
 
+esphome:
+  name: ${dn}
+  platform: ESP32
+  board: esp32doit-devkit-v1
+  on_boot:
+    - priority: 200.0
+      then:
+        - output.set_level:
+            id: duct_fan_output_id
+            level: ${duct_fan_vent_spd}%
+
 switch:
   - platform: gpio
     pin: ${wall_fan_pwr_pin}
@@ -199,4 +209,3 @@ climate:
       - logger.log: "WARNING: ${friendly_name} Thermostat has hit high temp!"
       - switch.turn_on: thermostat_on_id
       #TODO - provide some kind of warning / action here
-
diff --git a/_data/rack_3.yaml b/_data/rack_3.yaml
index dbe46be..7923eb8 100644
--- a/_data/rack_3.yaml
+++ b/_data/rack_3.yaml
@@ -1,8 +1,12 @@
 substitutions:
+  device_name: rack-3
+  dn: rack_3
+  sn: R3
+  friendly_name: Rack 3
   duct_fan_pin: GPIO13
-  duct_fan_name: R3 Duct Fan Spd
-  duct_fan_tgt_spd_in_name: Rack 3 Duct Fan Target Spd In
-  duct_fan_tgt_spd_out_name: Rack 3 Duct Fan Target Spd Out
+  duct_fan_name: ${sn} Duct Fan Spd
+  duct_fan_tgt_spd_in_name: ${sn} DF Tgt Spd In
+  duct_fan_tgt_spd_out_name: ${sn} DF Tgt Spd Out
   duct_fan_pwmfreq: 5000Hz
   duct_fan_off_spd: "0.0"
   duct_fan_lo_spd: "1.0"
@@ -13,9 +17,9 @@ substitutions:
   amppwr_name: "Denon Pwr"
   dallas_pin: GPIO32
   dallas_in_addr: "0x7F0114328974D728"
-  dallas_in_name: Rack 3 Temp In
+  dallas_in_name: ${friendly_name} Temp In
   dallas_out_addr: "0xB801143296ED7B28"
-  dallas_out_name: Rack 3 Temp Out
+  dallas_out_name: ${friendly_name} Temp Out
   dallas_update_interval: 30s
 
 globals:
@@ -28,7 +32,7 @@ globals:
   - id: duct_fan_amppwr_on_lo_spd_id
     type: float
     initial_value: ${duct_fan_amppwr_on_lo_spd}
-  - id: duct_fan_vent_spd
+  - id: duct_fan_vent_spd_id
     type: float
     initial_value: ${duct_fan_vent_spd}
   - id: duct_fan_hi_spd_id
@@ -39,6 +43,12 @@ esphome:
   name: rack_3
   platform: ESP32
   board: esp32doit-devkit-v1
+  on_boot:
+    - priority: 200.0
+      then:
+        - output.set_level:
+            id: duct_fan_output_id
+            level: ${duct_fan_vent_spd}%
 
 wifi:
   ssid: "kungle-ot"
@@ -138,7 +148,7 @@ number:
       curtemp = id(dallas_out_id).state;
       off_spd = id(duct_fan_off_spd_id);
       lo_spd = id(duct_fan_lo_spd_id);
-      vent_spd = id(duct_fan_vent_spd);
+      vent_spd = id(duct_fan_vent_spd_id);
       hi_spd = id(duct_fan_hi_spd_id);
       ESP_LOGD("fan_speed", "DEBUG Ventilate House: %d", id(ventilate_house).state);
       ESP_LOGD("fan_speed", "DEBUG Amp Power: %d", id(amppwr_id).state);
@@ -155,7 +165,10 @@ number:
         call.perform();
         return off_spd;
       }
-      if (curtemp > hi_temp) {
+      if (std::isnan(curtemp)) {
+        ESP_LOGD("fan_speed", "DEBUG current temp unknown. Set spd to vent.");
+        newspd = vent_spd;
+      } else if (curtemp > hi_temp) {
         ESP_LOGD("fan_speed", "DEBUG curtemp > hi_temp");
         newspd = hi_spd;
       } else if (curtemp < lo_temp) {
@@ -185,7 +198,7 @@ number:
 climate:
   - platform: thermostat
     id: thermostat_out_id
-    name: Rack3 Out
+    name: ${friendly_name} Out
     sensor: dallas_out_id
     visual:
       min_temperature: 60 °F
@@ -200,12 +213,12 @@ climate:
     min_heating_run_time: 60s
     min_idle_time: 60s
     heat_action:
-      - logger.log: "Turning off Rack3 Thermostat"
+      - logger.log: "Turning off ${friendly_name} Thermostat"
       - switch.turn_off: thermostat_on_id
     idle_action:
-      - logger.log: "Turning on Rack3 Thermostat"
+      - logger.log: "Turning on ${friendly_name} Thermostat"
       - switch.turn_on: thermostat_on_id
     cool_action:
-      - logger.log: "WARNING: Rack3 Thermostat has hit high temp!"
+      - logger.log: "WARNING: ${friendly_name} Thermostat has hit high temp!"
       - switch.turn_on: thermostat_on_id
       #TODO - provide some kind of warning / action here