From b30e0cc8775d63d1f71d4184bd524c9eb9b83364 Mon Sep 17 00:00:00 2001
From: longranger <longranger.406@gmail.com>
Date: Sun, 28 Nov 2021 14:56:31 -0800
Subject: [PATCH] Fix formatting and naming in rack3.

---
 rack_3.yaml | 75 +++++++++++++++++++----------------------------------
 1 file changed, 26 insertions(+), 49 deletions(-)

diff --git a/rack_3.yaml b/rack_3.yaml
index 538c198..75e1a7f 100644
--- a/rack_3.yaml
+++ b/rack_3.yaml
@@ -6,9 +6,9 @@ substitutions:
   amppwr_name: "Denon Pwr"
   dallas_pin: GPIO32
   dallas_in_addr: "0x7F0114328974D728"
-  dallas_in_name: rack_3_temp_in
+  dallas_in_name: Rack 3 Temp In
   dallas_out_addr: "0xB801143296ED7B28"
-  dallas_out_name: rack_3_temp_out
+  dallas_out_name: Rack 3 Temp Out
 
 esphome:
   name: rack_3
@@ -32,16 +32,16 @@ wifi:
 captive_portal:
 
 output:
-  - platform:  ledc
-    pin:       ${duct_fan_pin}
-    id:        duct_fan_output_id
+  - platform: ledc
+    pin: ${duct_fan_pin}
+    id: duct_fan_output_id
     frequency: ${duct_fan_pwmfreq}
 
 fan:
   - platform: speed
-    id:       duct_fan_spd_id
-    output:   duct_fan_output_id
-    name:     ${duct_fan_spd_name}
+    id: duct_fan_spd_id
+    output: duct_fan_output_id
+    name: ${duct_fan_spd_name}
 
 dallas:
   - pin:
@@ -51,12 +51,12 @@ dallas:
 
 sensor:
   - platform: dallas
-    address:  ${dallas_in_addr}
-    name:     ${dallas_in_name}
+    address: ${dallas_in_addr}
+    name: ${dallas_in_name}
   - platform: dallas
-    address:  ${dallas_out_addr}
-    name:     ${dallas_out_name}
-    id:       dallas_out_id
+    address: ${dallas_out_addr}
+    name: ${dallas_out_name}
+    id: dallas_out_id
     on_value:
       then:
         number.set:
@@ -74,25 +74,25 @@ sensor:
             }
             return 100 * (x - lo) / (hi - lo);
 number:
-  - platform:   template
-    id:         fan_speed_target_in
-    name:       Fan Speed Target In
+  - platform: template
+    id: fan_speed_target_in
+    name: Fan Speed Target In
     optimistic: true
-    min_value:  0
-    max_value:  100
-    step:       1
-  - platform:   template
-    id:         fan_speed_target_out
-    name:       Fan Speed Target Out
+    min_value: 0
+    max_value: 100
+    step: 1
+  - platform: template
+    id: fan_speed_target_out
+    name: Fan Speed Target Out
     optimistic: true
-    min_value:  0
-    max_value:  100
-    step:       1
+    min_value: 0
+    max_value: 100
+    step: 1
     on_value_range:
       above: 25.0
       then:
         fan.turn_on:
-          id:    duct_fan_spd_id
+          id: duct_fan_spd_id
           speed: !lambda |-
             return x;
 
@@ -130,29 +130,6 @@ binary_sensor:
     pin: ${amppwr_pin}
     name: ${amppwr_name}
     device_class: power
-    # on_press:
-    #   then:
-    #     - if:
-    #         condition:
-    #           lambda: 'return id(${duct_fan_spd_id}).state == "OFF";'
-    #         then:
-    #           - logger.log: "${duct_fan_spd_name} was off. Turning on as ${amppwr_name} turned on."
-    #           - fan.turn_on:
-    #               id: ${duct_fan_spd_id}
-    #               speed: LOW
-    #         else:
-    #           - logger.log: "${amppwr_name} turned on, but not turning on ${duct_fan_spd_name} as already on."
-
-    # on_release:
-    #   then:
-    #     - fan.turn_on:
-    #         id: ${duct_fan_spd_id}
-    #         speed: LOW
-
-      # - lambda: |-
-      #     if (id(${duct_fan_spd_id}).is_off) {
-
-
 
 # Enable logging
 logger: