Many changes.

attic_2_fan.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: attic_2_fan
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.70
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "Attic 2 Fan button"
-    on_press:
-      - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Attic 2 Fan relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-sensor:
-  - platform: wifi_signal
-    name: "Attic 2 Fan WiFi signal"
-    update_interval: 60s
-
-  - platform: uptime
-    name: "Attic 2 Fan uptime"
-
-text_sensor:
-  - platform: version
-    name: "Attic 2 Fan ESPHome version"

downlight_1.yaml

@@ -0,0 +1,51 @@
+esphome:
+  name: downlight01
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "kungle-oss"
+  password: "hcfU8@gG&8Hm"
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+my9231:
+  data_pin: GPIO13
+  clock_pin: GPIO15
+  num_channels: 4
+  num_chips: 1
+
+output:
+  - platform: esp8266_pwm
+    pin: 14
+    id: output_blue
+  - platform: esp8266_pwm
+    pin: 12
+    id: output_green
+  - platform: esp8266_pwm
+    pin: 4
+    id: output_red
+  - platform: esp8266_pwm
+    pin: 5
+    id: output_coldwhite
+  - platform: esp8266_pwm
+    pin: 13
+    id: output_warmwhite
+
+light:
+  - platform: rgbww
+    name: '${device_name} Light'
+    default_transition_length: 0s
+    red: output_red
+    green: output_green
+    blue: output_blue
+    cold_white: output_coldwhite
+    warm_white: output_warmwhite
+    cold_white_color_temperature: 6500 K
+    warm_white_color_temperature: 2700 K

pj_3_duct_fan_pwr.yaml

@@ -0,0 +1,83 @@
+substitutions:
+  device_name: "pj_3_duct_fan_pwr"
+  friendly_name: "Prj 3 Duct Fan Pwr"
+
+esphome:
+  name: pj_3_duct_fan_pwr
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid:         "kungle-oss"
+  password:     "hcfU8@gG&8Hm"
+  fast_connect: true
+
+  manual_ip:
+    static_ip: 192.168.35.240
+    gateway:   192.168.35.1
+    subnet:    255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Pj 3 Duct Fan Pwr"
+    password: "ImgAxoEGSc90"
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO4
+      mode: INPUT_PULLUP
+      inverted: True
+    name: "${friendly_name} Button"
+    id: "${device_name}_button"
+    on_press:
+      - switch.toggle: "${device_name}_relay"
+  - platform: status
+    name: "${friendly_name} Status"
+    id: "${device_name}_status"
+
+switch:
+  - platform: gpio
+    name: "${friendly_name} Relay"
+    id: "${device_name}_relay"
+    pin: GPIO14
+    on_turn_on:
+      - output.turn_on: led
+    on_turn_off:
+      - output.turn_off: led
+
+status_led:
+  pin:
+    number: GPIO12
+    inverted: yes
+
+output:
+  - platform: gpio
+    pin: GPIO13
+    inverted: true
+    id: led
+
+sensor:
+  - platform: wifi_signal
+    name: "${friendly_name} WiFi signal"
+    id: "${device_name}_wifi_signal"
+    update_interval: 60s
+  - platform: uptime
+    name: "${friendly_name} Uptime"
+    id: "${device_name}_uptime"
+    update_interval: 60s
+
+text_sensor:
+  - platform: version
+    name: "${friendly_name} ESPHome Version"
+    id: "${device_name}_esphome_version"

projector_3.yaml

@@ -0,0 +1,106 @@
+substitutions:
+  duct_fan_pin:      GPIO14
+  duct_fan_id:       duct_fan_id
+  duct_fan_pwmfreq:  5000Hz
+  duct_fan_spd_id:   duct_fan_spd_id
+  duct_fan_spd_name: pj_3_duct_fan_spd
+  # heat_pin:  GPIO19
+  # heat_name: "Denon Pwr"
+  dallas_pin: GPIO32
+  dallas_1_addr: "0x1F3C01D0756F0928"
+  dallas_1_name: pj_3_temp_cold
+  dallas_2_addr: "0x873C01D0756D4B28"
+  dallas_2_name: pj_3_temp_prj_exh
+  dallas_3_addr: "0xA901143295610E28"
+  dallas_3_name: pj_3_temp_box_exh
+
+esphome:
+  name:     pj_3
+  platform: ESP32
+  board:    esp32doit-devkit-v1
+
+wifi:
+  ssid:         "kungle-oss"
+  password:     "hcfU8@gG&8Hm"
+  fast_connect: true
+
+  manual_ip:
+    static_ip: 192.168.35.192
+    gateway:   192.168.35.1
+    subnet:    255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid:     "Projector 3 Fallback Hotspot"
+    password: "xfPfYSP3N0C3"
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+output:
+  - platform: ledc
+    pin: ${duct_fan_pin}
+    id: ${duct_fan_id}
+    frequency: ${duct_fan_pwmfreq}
+
+fan:
+  - platform: speed
+    id: ${duct_fan_spd_id}
+    output: ${duct_fan_id}
+    name: ${duct_fan_spd_name}
+    # speed:
+    #   low: 0.2
+    #   medium: 0.6
+    #   high: 1.0
+
+dallas:
+  - pin:
+      number: ${dallas_pin}
+      mode: INPUT_PULLUP
+    update_interval: 10s
+
+sensor:
+  - platform: dallas
+    address: ${dallas_1_addr}
+    name: ${dallas_1_name}
+  - platform: dallas
+    address: ${dallas_2_addr}
+    name: ${dallas_2_name}
+  - platform: dallas
+    address: ${dallas_3_addr}
+    name: ${dallas_3_name}
+
+# # Sense when receiver is turned on
+# binary_sensor:
+#   - platform: gpio
+#     pin: ${heat_pin}
+#     name: ${heat_name}
+#     device_class: power
+#     # on_press:
+#     #   then:
+#     #     - if:
+#     #         condition:
+#     #           lambda: 'return id(${duct_fan_spd_id}).state == "OFF";'
+#     #         then:
+#     #           - logger.log: "${duct_fan_spd_name} was off. Turning on as ${heat_name} turned on."
+#     #           - fan.turn_on:
+#     #               id: ${duct_fan_spd_id}
+#     #               speed: LOW
+#     #         else:
+#     #           - logger.log: "${heat_name} turned on, but not turning on ${duct_fan_spd_name} as already on."
+
+#     # on_release:
+#     #   then:
+#     #     - fan.turn_on:
+#     #         id: ${duct_fan_spd_id}
+#     #         speed: LOW
+
+#       # - lambda: |-
+#       #     if (id(${duct_fan_spd_id}).is_off) {

rack_2.yaml

@@ -1,3 +1,23 @@
+substitutions:
+  duct_fan_pin: GPIO13
+  duct_fan_id: duct_fan_id
+  duct_fan_name: Rack 2 Duct Fan Speed
+  # duct_fan_channel: "0"
+  duct_fan_pwmfreq: 5000Hz
+  wall_fan_pwr_pin: GPIO21
+  wall_fan_pwr_name: Rack 2 Wall Fan Power
+  wall_fan_spd_pin: GPIO22
+  wall_fan_spd_id: wall_fan_spd_id
+  # wall_fan_spd_channel: "2"
+  wall_fan_spd_pwmfreq: 25000Hz
+  wall_fan_spd_name: Rack 2 Wall Fan Speed
+  wall_fan_tach_pin: GPIO23
+  wall_fan_tach_id: wall_fan_tach_id
+  wall_fan_tach_name: Rack 2 Wall Fan Tach
+  dallas_pin: GPIO32
+  dallas_name_1: Rack 2 Temp Hot
+  dallas_name_2: Rack 2 Temp Cold
+
 esphome:
   name: rack_2
   platform: ESP32
@@ -19,50 +39,59 @@ wifi:
 
 captive_portal:
 
+switch:
+  - platform: gpio
+    pin: ${wall_fan_pwr_pin}
+    name: ${wall_fan_pwr_name}
+
 output:
   - platform: ledc
-    pin: GPIO13
+    pin: ${duct_fan_pin}
-    id: gpio_13
+    id: ${duct_fan_id}
+    channel: 0
+    frequency: ${duct_fan_pwmfreq}
   - platform: ledc
-    pin: GPIO22
+    pin: ${wall_fan_spd_pin}
-    id: gpio_22
+    id: ${wall_fan_spd_id}
+    channel: 2
+    frequency: ${wall_fan_spd_pwmfreq}
 
 fan:
   - platform: speed
-    output: gpio_13
+    output:   ${duct_fan_id}
-    name: "rack_2_duct_fan"
+    name:     ${duct_fan_name}
-    speed:
+    # speed:
-      low: 0.3
+    #   low: 0.2
-      medium: 0.5
+    #   medium: 0.6
-      high: 1.0
+    #   high: 1.0
   - platform: speed
-    output: gpio_22
+    output:   ${wall_fan_spd_id}
-    name: "rack_2_wall_fan"
+    name:     ${wall_fan_spd_name}
-    speed:
+    # speed:
-      low: 0.3
+    #   low: 0.0
-      medium: 0.5
+    #   medium: 0.8
-      high: 1.0
+    #   high: 1.0
 
 sensor:
   - platform: pulse_counter
     pin:
-      number: GPIO23
+      number: ${wall_fan_tach_pin}
       mode: INPUT_PULLUP
     unit_of_measurement: 'RPM'
-    name: "rack_2_wall_fan_speed"
+    name: ${wall_fan_tach_name}
     update_interval: 10s
     filters:
       - multiply: 0.5
-  - platform: dallas
-    address: 0xB801143296ED7B28
-    name: "rack_2_cold_temp"
   - platform: dallas
     address: 0x1D01143296570128
-    name: "rack_2_hot_temp"
+    name: ${dallas_name_1}
+  - platform: dallas
+    address: 0x1D02131D6063AA28
+    name: ${dallas_name_2}
 
 dallas:
   - pin:
-      number: GPIO32
+      number: ${dallas_pin}
       mode: INPUT_PULLUP
     update_interval: 10s
 

rack_2_duct_fan_pwr.yaml

@@ -0,0 +1,55 @@
+esphome:
+  name: rack_2_duct_fan_pwr
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: kungle-ot
+  password: ThingsWelcomeToKungle
+
+  manual_ip:
+    static_ip: 192.168.37.70
+    gateway: 192.168.37.1
+    subnet: 255.255.255.0
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+
+# binary_sensor:
+#   - platform: gpio
+#     pin:
+#       number: GPIO4
+#       mode: INPUT_PULLUP
+#       inverted: True
+#     name: "Rack 2 Duct Fan Power Button"
+#     on_press:
+#       - switch.toggle: relay
+
+switch:
+  - platform: gpio
+    name: "Rack 2 Duct Fan Power Relay"
+    pin: GPIO14
+    id: relay
+
+status_led:
+  pin:
+    number: GPIO12
+    inverted: yes
+
+# sensor:
+#   - platform: wifi_signal
+#     name: "Rack 2 Duct Fan Power WiFi Signal"
+#     update_interval: 60s
+
+#   - platform: uptime
+#     name: "Rack 2 Duct Fan Power uptime"
+
+# text_sensor:
+#   - platform: version
+#     name: "Rack 2 Duct Fan Power ESPHome Version"

rack_3.yaml

@@ -0,0 +1,102 @@
+substitutions:
+  duct_fan_pin: GPIO13
+  duct_fan_id: duct_fan_id
+  duct_fan_pwmfreq: 5000Hz
+  duct_fan_spd_id: duct_fan_spd_id
+  duct_fan_spd_name: rack_3_duct_fan_spd
+  heat_pin: GPIO19
+  heat_name: "Denon Pwr"
+  dallas_pin: GPIO32
+  dallas_1_addr: "0x7F0114328974D728"
+  dallas_1_name: rack_3_temp_cold
+  dallas_2_addr: "0xB801143296ED7B28"
+  dallas_2_name: rack_3_temp_hot
+
+esphome:
+  name: rack_3
+  platform: ESP32
+  board: esp32doit-devkit-v1
+
+wifi:
+  ssid: "kungle-ot"
+  password: "ThingsWelcomeToKungle"
+
+  manual_ip:
+    static_ip: 192.168.37.74
+    gateway: 192.168.37.1
+    subnet: 255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Rack 3 Fallback Hotspot"
+    password: "jj0CXEgu3Lzo"
+
+captive_portal:
+
+output:
+  - platform: ledc
+    pin: ${duct_fan_pin}
+    id: ${duct_fan_id}
+    frequency: ${duct_fan_pwmfreq}
+
+fan:
+  - platform: speed
+    id: ${duct_fan_spd_id}
+    output: ${duct_fan_id}
+    name: ${duct_fan_spd_name}
+    # speed:
+    #   low: 0.2
+    #   medium: 0.6
+    #   high: 1.0
+
+dallas:
+  - pin:
+      number: ${dallas_pin}
+      mode: INPUT_PULLUP
+    update_interval: 10s
+
+sensor:
+  - platform: dallas
+    address: ${dallas_1_addr}
+    name: ${dallas_1_name}
+  - platform: dallas
+    address: ${dallas_2_addr}
+    name: ${dallas_2_name}
+
+# Sense when receiver is turned on
+binary_sensor:
+  - platform: gpio
+    pin: ${heat_pin}
+    name: ${heat_name}
+    device_class: power
+    # on_press:
+    #   then:
+    #     - if:
+    #         condition:
+    #           lambda: 'return id(${duct_fan_spd_id}).state == "OFF";'
+    #         then:
+    #           - logger.log: "${duct_fan_spd_name} was off. Turning on as ${heat_name} turned on."
+    #           - fan.turn_on:
+    #               id: ${duct_fan_spd_id}
+    #               speed: LOW
+    #         else:
+    #           - logger.log: "${heat_name} turned on, but not turning on ${duct_fan_spd_name} as already on."
+
+    # on_release:
+    #   then:
+    #     - fan.turn_on:
+    #         id: ${duct_fan_spd_id}
+    #         speed: LOW
+
+      # - lambda: |-
+      #     if (id(${duct_fan_spd_id}).is_off) {
+
+
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:

rack_3_duct_fan.yaml

@@ -1,42 +0,0 @@
-esphome:
-  name: rack_3_duct_fan
-  platform: ESP32
-  board: esp32doit-devkit-v1
-
-wifi:
-  ssid: "kungle-ot"
-  password: "ThingsWelcomeToKungle"
-
-  manual_ip:
-    static_ip: 192.168.37.74
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-    
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Rack 3 Duct Fan Fallback Hotspot"
-    password: "Ze13rpDX4Qm6"
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-output:
-  - platform: ledc
-    pin: GPIO19
-    id: gpio_19
-
-fan:
-  - platform: speed
-    output: gpio_19
-    name: "rack_3_duct_fan"
-    speed:
-      low: 0.3
-      medium: 0.5
-      high: 1.0

rack_3_duct_fan_pwr.yaml

@@ -0,0 +1,55 @@
+esphome:
+  name: rack_3_duct_fan_pwr
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: kungle-ot
+  password: ThingsWelcomeToKungle
+
+  manual_ip:
+    static_ip: 192.168.37.68
+    gateway: 192.168.37.1
+    subnet: 255.255.255.0
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+
+# binary_sensor:
+#   - platform: gpio
+#     pin:
+#       number: GPIO4
+#       mode: INPUT_PULLUP
+#       inverted: True
+#     name: "Rack 3 Duct Fan Power Button"
+#     on_press:
+#       - switch.toggle: relay
+
+switch:
+  - platform: gpio
+    name: "Rack 3 Duct Fan Power Relay"
+    pin: GPIO14
+    id: relay
+
+status_led:
+  pin:
+    number: GPIO12
+    inverted: yes
+
+# sensor:
+#   - platform: wifi_signal
+#     name: "Rack 3 Duct Fan Power WiFi Signal"
+#     update_interval: 60s
+
+#   - platform: uptime
+#     name: "Rack 3 Duct Fan Power uptime"
+
+# text_sensor:
+#   - platform: version
+#     name: "Rack 3 Duct Fan Power ESPHome Version"

server_2_wall_fan.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: server_2_wall_fan
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.68
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "Server 2 Wall Fan button"
-    on_press:
-      - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Server 2 Wall Fan relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-sensor:
-  - platform: wifi_signal
-    name: "Server 2 Wall Fan WiFi signal"
-    update_interval: 60s
-
-  - platform: uptime
-    name: "Server 2 Wall Fan uptime"
-
-text_sensor:
-  - platform: version
-    name: "Server 2 Wall Fan ESPHome version"