longranger/esphome
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Working with both duct fans.

Browse Source
This commit is contained in:
longranger
2024-05-12 19:58:06 -07:00
parent 9a2061cfe7
commit c64900ed16
1 changed files with 232 additions and 79 deletions
Download Patch File Download Diff File Expand all files Collapse all files

311
_data/rack_2.yaml
View File

@@ -3,10 +3,12 @@ substitutions:
dn: rack_2
sn: R2
friendly_name: Rack 2
ts_wants_name: ${friendly_name} Thermostat Wants
df_attic_pin: GPIO13
df_attic_name: ${friendly_name} Attic Duct Fan Spd
df_attic_vent_spd_name: ${sn} DF Vent Spd
df_attic_tgt_spd_out_name: ${sn} DF Tgt Spd Out
df_attic_name: ${friendly_name} Attic Duct Fan
df_attic_ovrr_spd_name: ${friendly_name} Attic Duct Fan Override Spd
df_attic_ovrr_sw_name: ${friendly_name} Attic Duct Fan Override
df_attic_pwmfreq: 5000Hz
df_attic_off_spd: "0.0"
df_attic_lo_spd: "1.0"
@@ -15,6 +17,24 @@ substitutions:
df_attic_tach_pin: GPIO12
df_attic_tach_id: df_attic_tach_id
df_attic_tach_name: ${friendly_name} Attic Duct Fan Tach
# AC Infiniti S8 seems to get up to 9300, so lets divide by 100
df_attic_tach_multiplier: "0.01"
df_lndry_pin: GPIO19
df_lndry_name: ${friendly_name} Laundry Duct Fan
df_lndry_ovrr_spd_name: ${friendly_name} Laundry Duct Fan Override Spd
df_lndry_ovrr_sw_name: ${friendly_name} Laundry Duct Fan Override
df_lndry_pwmfreq: 5000Hz
df_lndry_off_spd: "0.0"
df_lndry_lo_spd: "20.0"
df_lndry_init_spd: "40.0"
df_lndry_hi_spd: "100.0"
df_lndry_tach_pin: GPIO18
df_lndry_tach_id: df_lndry_tach_id
df_lndry_tach_name: ${friendly_name} Laundry Duct Fan Tach
# AC Infiniti S6 seems to get up to 43,000 at 90% so lets divide by 500
df_lndry_tach_multiplier: "0.002"
# wall_fan_pwr_pin: GPIO21
# wall_fan_pwr_name: ${friendly_name} Wall Fan Power
# wall_fan_spd_pin: GPIO22
@@ -40,6 +60,15 @@ globals:
- id: df_attic_hi_spd_id
type: float
initial_value: ${df_attic_hi_spd}
- id: df_lndry_off_spd_id
type: float
initial_value: ${df_lndry_off_spd}
- id: df_lndry_lo_spd_id
type: float
initial_value: ${df_lndry_lo_spd}
- id: df_lndry_hi_spd_id
type: float
initial_value: ${df_lndry_hi_spd}
<<: !include .common.yaml
<<: !include .wifi-oss.yaml
@@ -51,18 +80,12 @@ esphome:
on_boot:
- priority: 200.0
then:
# - output.set_level:
# id: df_attic_output_id
# level: ${df_attic_init_spd}%
- output.set_level:
id: df_attic_output_id
level: ${df_attic_init_spd}%
switch:
# - platform: gpio
# pin: ${wall_fan_pwr_pin}
# name: ${wall_fan_pwr_name}
- platform: template
name: Thermostat On
id: thermostat_on_id
optimistic: true
id: df_lndry_output_id
level: ${df_lndry_init_spd}%
output:
- platform: ledc
@@ -70,6 +93,11 @@ output:
id: df_attic_output_id
channel: 0
frequency: ${df_attic_pwmfreq}
- platform: ledc
pin: ${df_lndry_pin}
id: df_lndry_output_id
channel: 2
frequency: ${df_lndry_pwmfreq}
# - platform: ledc
# pin: ${wall_fan_spd_pin}
# id: wall_fan_spd_id
@@ -81,6 +109,10 @@ fan:
id: df_attic_spd_id
output: df_attic_output_id
name: ${df_attic_name}
- platform: speed
id: df_lndry_spd_id
output: df_lndry_output_id
name: ${df_lndry_name}
# - platform: speed
# output: wall_fan_spd_id
# name: ${wall_fan_spd_name}
@@ -96,11 +128,20 @@ sensor:
pin:
number: ${df_attic_tach_pin}
mode: INPUT_PULLUP
unit_of_measurement: 'RPM'
unit_of_measurement: '%'
name: ${df_attic_tach_name}
update_interval: 10s
filters:
- multiply: 0.5
- multiply: ${df_attic_tach_multiplier}
- platform: pulse_counter
pin:
number: ${df_lndry_tach_pin}
mode: INPUT_PULLUP
unit_of_measurement: '%'
name: ${df_lndry_tach_name}
update_interval: 10s
filters:
- multiply: ${df_lndry_tach_multiplier}
# - platform: pulse_counter
# pin:
# number: ${wall_fan_tach_pin}
@@ -123,78 +164,173 @@ binary_sensor:
name: "Ventilate House"
entity_id: binary_sensor.ventilate_house
id: ventilate_house
- platform: homeassistant
name: "Windows Open"
entity_id: binary_sensor.windows_open
id: windows_open
switch:
# - platform: gpio
# pin: ${wall_fan_pwr_pin}
# name: ${wall_fan_pwr_name}
- platform: template
name: ${df_attic_ovrr_sw_name}
id: df_attic_ovrr
optimistic: true
on_turn_on:
then:
lambda: |-
ESP_LOGD("speed_fan", "Setting Attic Fan per Override: %f", id(df_attic_ovrr_spd_id).state);
auto call = id(df_attic_spd_id).turn_on();
call.set_speed(id(df_attic_ovrr_spd_id).state);
call.perform();
on_turn_off:
then:
- logger.log: "Attic Fan Override turned off."
- fan.turn_off: df_attic_spd_id
- platform: template
name: ${df_lndry_ovrr_sw_name}
id: df_lndry_ovrr
optimistic: true
on_turn_on:
then:
lambda: |-
ESP_LOGD("speed_fan", "Setting Laundry Fan per Override: %f", id(df_attic_ovrr_spd_id).state);
auto call = id(df_lndry_spd_id).turn_on();
call.set_speed(id(df_lndry_ovrr_spd_id).state);
call.perform();
on_turn_off:
then:
- logger.log: "Laundry Fan Override turned off."
- fan.turn_off: df_lndry_spd_id
number:
- platform: template
id: df_attic_vent_spd_id
name: ${df_attic_vent_spd_name}
id: df_attic_ovrr_spd_id
name: ${df_attic_ovrr_spd_name}
optimistic: true
min_value: ${df_attic_lo_spd}
min_value: 0.0
max_value: ${df_attic_hi_spd}
step: 10
initial_value: ${df_attic_init_spd}
- platform: template
id: df_attic_tgt_spd_out
name: ${df_attic_tgt_spd_out_name}
min_value: ${df_attic_off_spd}
max_value: ${df_attic_hi_spd}
step: 1
set_action:
on_value:
then:
lambda: |-
float lo_temp;
float hi_temp;
float curtemp;
float off_spd;
float lo_spd;
float vent_spd;
float hi_spd;
float newspd;
lo_temp = id(thermostat_out_id).target_temperature_low;
hi_temp = id(thermostat_out_id).target_temperature_high;
curtemp = id(dallas_out_id).state;
off_spd = id(df_attic_off_spd_id);
lo_spd = id(df_attic_lo_spd_id);
vent_spd = id(df_attic_vent_spd_id).state;
hi_spd = id(df_attic_hi_spd_id);
ESP_LOGD("fan_speed", "DEBUG Ventilate House: %d", id(ventilate_house).state);
ESP_LOGD("fan_speed", "DEBUG Current Temp: %f", curtemp);
ESP_LOGD("fan_speed", "DEBUG Thermostat State: %d", id(thermostat_on_id).state);
if ((id(ventilate_house).state == false) &&
((curtemp < lo_temp) || (id(thermostat_on_id).state == false))) {
ESP_LOGD("fan_speed", "DEBUG turning off");
auto call = id(df_attic_spd_id).turn_off();
call.perform();
return off_spd;
}
if (curtemp > hi_temp) {
ESP_LOGD("fan_speed", "DEBUG curtemp > hi_temp");
newspd = hi_spd;
} else {
// Set newspd to same linear proportion of spd range as current temp is of temp range
newspd = lo_spd + ((hi_spd - lo_spd) * (curtemp - lo_temp) / (hi_temp - lo_temp));
ESP_LOGD("fan_speed", "DEBUG New Speed set: %f", newspd);
}
if ((id(ventilate_house).state == true) && (newspd < vent_spd)) {
newspd = vent_spd;
ESP_LOGD("fan_speed", "DEBUG New Speed changed to Vent Speed: %f", newspd);
}
if (newspd < lo_spd) {
ESP_LOGD("fan_speed", "DEBUG New Speed under lo_spd, turning off");
auto call = id(df_attic_spd_id).turn_off();
call.perform();
return off_spd;
}
ESP_LOGD("fan_speed", "DEBUG Setting fan to newspd: %f", newspd);
auto call = id(df_attic_spd_id).turn_on();
call.set_speed(newspd);
call.perform();
return newspd;
if:
condition:
switch.is_on: df_attic_ovrr
then:
lambda: |-
auto call = id(df_attic_spd_id).turn_on();
call.set_speed(x);
call.perform();
- platform: template
id: df_lndry_ovrr_spd_id
name: ${df_lndry_ovrr_spd_name}
optimistic: true
min_value: 0.0
max_value: ${df_lndry_hi_spd}
step: 10
initial_value: ${df_lndry_init_spd}
on_value:
then:
if:
condition:
switch.is_on: df_lndry_ovrr
then:
lambda: |-
auto call = id(df_lndry_spd_id).turn_on();
call.set_speed(x);
call.perform();
- platform: template
id: ts_wants_id
name: ${ts_wants_name}
optimistic: true
min_value: 0
max_value: 100
step: 1
time:
platform: sntp
on_time:
- seconds: /10
then:
- logger.log: "...on_time..."
- number.set:
id: ts_wants_id
value: !lambda |-
float lo_temp;
float hi_temp;
float curtemp;
float newpct;
curtemp = id(dallas_out_id).state;
lo_temp = id(ts_out_id).target_temperature_low;
hi_temp = id(ts_out_id).target_temperature_high;
newpct = ((curtemp - lo_temp) / (hi_temp - lo_temp)) * 100;
if (newpct < 0) {
newpct = 0;
}
if (newpct > 100) {
newpct = 100;
}
ESP_LOGD("cron", "DEBUG Thermostat Wants percent: %f", newpct);
return newpct;
- if:
condition:
and:
- binary_sensor.is_on: ventilate_house
- switch.is_off: df_attic_ovrr
then:
# Set Attic fan to at least Ventilate Speed
# Turn Laundry fan off
- lambda: |-
float lo_spd;
float hi_spd;
float ovrr_spd;
float ts_wants_pct;
float ts_wants_spd;
float new_spd;
lo_spd = id(df_attic_lo_spd_id);
hi_spd = id(df_attic_hi_spd_id);
ovrr_spd = id(df_attic_ovrr_spd_id).state;
ts_wants_pct = id(ts_wants_id).state;
ts_wants_spd = lo_spd + ((hi_spd - lo_spd) * ts_wants_pct / 100);
ESP_LOGD("cron", "DEBUG Thermostat Wants Attic Fan Speed: %f", ts_wants_spd);
ESP_LOGD("cron", "DEBUG Ventilate Wants Attic Fan Speed: %f", ovrr_spd);
if (ovrr_spd > ts_wants_spd) {
new_spd = ovrr_spd;
} else {
new_spd = ts_wants_spd;
}
ESP_LOGD("cron", "DEBUG Setting Attic Fan Speed: %f", new_spd);
auto call = id(df_attic_spd_id).turn_on();
call.set_speed(new_spd);
call.perform();
- if:
condition:
and:
- binary_sensor.is_off: ventilate_house
- switch.is_off: df_lndry_ovrr
then:
# Set Laundry fan per thermostat
- lambda: |-
float lo_spd;
float hi_spd;
float ts_wants_pct;
float ts_wants_spd;
lo_spd = id(df_lndry_lo_spd_id);
hi_spd = id(df_lndry_hi_spd_id);
ts_wants_pct = id(ts_wants_id).state;
ts_wants_spd = lo_spd + ((hi_spd - lo_spd) * ts_wants_pct / 100);
ESP_LOGD("cron", "DEBUG Thermostat Wants Laundry Fan Speed: %f", ts_wants_spd);
ESP_LOGD("cron", "DEBUG Setting Laundry Fan Speed: %f", ts_wants_spd);
auto call = id(df_lndry_spd_id).turn_on();
call.set_speed(ts_wants_spd);
call.perform();
# Dual-point thermostat
climate:
- platform: thermostat
id: thermostat_out_id
id: ts_out_id
name: ${friendly_name} Out
sensor: dallas_out_id
visual:
@@ -204,6 +340,7 @@ climate:
default_preset: Default
preset:
- name: Default
mode: auto
default_target_temperature_low: 75 °F
default_target_temperature_high: 100 °F
min_cooling_off_time: 60s
@@ -213,11 +350,27 @@ climate:
min_idle_time: 60s
heat_action:
- logger.log: "Turning off ${friendly_name} Thermostat"
- switch.turn_off: thermostat_on_id
- number.set:
id: ts_wants_id
value: 0
idle_action:
- logger.log: "Turning on ${friendly_name} Thermostat"
- switch.turn_on: thermostat_on_id
- number.set:
id: ts_wants_id
value: !lambda |-
float lo_temp;
float hi_temp;
float curtemp;
float newpct;
curtemp = id(dallas_out_id).state;
lo_temp = id(ts_out_id).target_temperature_low;
hi_temp = id(ts_out_id).target_temperature_high;
newpct = ((curtemp - lo_temp) / (hi_temp - lo_temp)) * 100;
ESP_LOGD("thermostat", "DEBUG Thermostat Wants: %f", newpct);
return newpct;
cool_action:
- logger.log: "WARNING: ${friendly_name} Thermostat has hit high temp!"
- switch.turn_on: thermostat_on_id
- number.set:
id: ts_wants_id
value: 100
#TODO - provide some kind of warning / action here