New outside fountain relay.

2024-05-11 07:20:17 -07:00
parent f7dbd54180
commit d7a1116557
1 changed files with 103 additions and 104 deletions
--- a/_data/fountain_outside.yaml
+++ b/_data/fountain_outside.yaml
@@ -3,120 +3,119 @@ substitutions:
  dn: fountain_outside
  friendly_name: Fountain Outside
  device_description: Energy Monitoring Smart Plug with button, blue LED, and red LED.
+  # Higher value gives lower watt readout
+  current_res: "0.001"
+  # Lower value gives lower voltage readout
+  voltage_div: "770"  

 <<: !include .common.yaml
-<<: !include .esp8266.yaml
 <<: !include .wifi-oss.yaml

-# Enable time component for use by daily power sensor
-time:
-  - platform: homeassistant
-    id: homeassistant_time
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO1
-      mode: INPUT_PULLUP
-      inverted: True
-    name: ${friendly_name} button
-    on_multi_click:
-      - timing:
-          - ON for at most 1s
-          - OFF for at most 1s
-          - ON for at most 1s
-          - OFF for at least 0.2s
-        then:
-          - logger.log: "Double Clicked"
-          - switch.toggle: relay2
-      - timing:
-          - ON for 1s to 2s
-          - OFF for at least 0.5s
-        then:
-          - logger.log: "Single Long Clicked"
-      - timing:
-          - ON for at most 1s
-          - OFF for at least 0.5s
-        then:
-          - logger.log: "Single Short Clicked"
-          - switch.toggle: relay1
+esphome:
+  name: "${dn}"
+  platform: ESP32
+  board: esp-wrover-kit

 switch:
  - platform: gpio
-    name: ${friendly_name} relay
-    pin: GPIO12
+    name: ${friendly_name} Pump
+    pin:
+      number: GPIO15
+      inverted: false
    id: relay1
+    on_turn_on:
+      - light.turn_on: relay1_led
+    on_turn_off:
+      - light.turn_off: relay1_led
  - platform: gpio
-    name: ${friendly_name} Light relay
-    pin: GPIO14
+    name: ${friendly_name} Light
+    pin:
+      number: GPIO32
+      inverted: false
    id: relay2
+    on_turn_on:
+      - light.turn_on: relay2_led
+    on_turn_off:
+      - light.turn_off: relay2_led
+  - platform: restart
+    name: ${friendly_name} Restart
+
+output:
+  - platform: gpio
+    pin: GPIO19
+    inverted: True
+    id: relay1_led_gpio
+  - platform: gpio
+    pin: GPIO16
+    inverted: True
+    id: relay2_led_gpio
+
+light:
+  - platform: binary
+    name: "Relay1 LED"
+    id: relay1_led
+    internal: true    
+    output: relay1_led_gpio
+  - platform: binary
+    name: "Relay2 LED"
+    id: relay2_led
+    internal: true
+    output: relay2_led_gpio
+
+sensor:
+  - platform: adc
+    pin: GPIO34
+    name: "${friendly_name} LUX"
+    update_interval: 10s
+    attenuation: 11db
+  - platform: hlw8012
+    sel_pin:
+      number: GPIO25
+      inverted: true
+    cf_pin: GPIO27
+    cf1_pin: GPIO26
+    current_resistor: ${current_res}
+    voltage_divider: ${voltage_div}
+    change_mode_every: 3
+    update_interval: 3s    
+    current:
+      name: "${friendly_name} Amps"
+      unit_of_measurement: A
+      accuracy_decimals: 2
+    voltage:
+      name: "${friendly_name} Volts"
+      unit_of_measurement: V
+      accuracy_decimals: 1
+    power:
+      name: "${friendly_name} Watts"
+      unit_of_measurement: W
+      accuracy_decimals: 1    
+      filters:
+        - calibrate_linear:
+            - 0.0 -> 0.0
+            - 134 -> 58 
+
+binary_sensor:
+  - platform: gpio
+    internal: true
+    pin:
+      number: GPIO18
+      mode: INPUT_PULLDOWN
+      inverted: True
+    name: ${friendly_name} Button1
+    on_press:
+      - switch.toggle: relay1
+  - platform: gpio
+    internal: true
+    pin:
+      number: GPIO17
+      mode: INPUT_PULLDOWN
+      inverted: True
+    name: ${friendly_name} Button2
+    on_press:
+      - switch.toggle: relay2

 status_led:
  pin:
-    number: GPIO3
-    # inverted: yes
-
-sensor:
-  - platform: wifi_signal
-    name: ${friendly_name} WiFi signal
-    update_interval: 60s
-
-  - platform: uptime
-    name: ${friendly_name} uptime
-
-# Reports the Current, Voltage, and Power used by the plugged-in device (not counting this plug's own usage of about 0.7W/0.02A, so subtract those when calibrating with this plugged into a Kill-A-Watt type meter)
-  - platform: hlw8012
-    sel_pin:
-      number: GPIO13
-      inverted: True
-    cf_pin: GPIO4
-    cf1_pin: GPIO5
-    current_resistor: 0.001 #The value of the shunt resistor for current measurement. Defaults to the Sonoff POW’s value 0.001 ohm. Verified on https://fccid.io/2AKBP-X10S/Internal-Photos/X10S-Int-photo-4308983 that we use "R001" = 0.001 ohm
-    voltage_divider: 2351 #The value of the voltage divider on the board as (R_upstream + R_downstream) / R_downstream. Defaults to the Sonoff POW’s value 2351. From the pic we use 2x "125" = 2x 1.2Mohm for R_upstream and "102" = 1kohm for R_downstream, so (1,200,000+1,200,000+1,000)/1,000 = 2401
-    # but those don't fix the measurement values, probably because we actually have a BL0937 chip instead of a HLW8012, (and part variance aswell) so we have to manually calibrate with a known load or a load and a Kill-A-Watt type meter. My values used below will only be +/-10% of yours I think.
-    # The comments about the voltage divider were taken from the AWP04L template. I was unable to verify the voltage divider in the Aoycocr X10S plug.
-    power:
-      name: ${friendly_name} Power
-      unit_of_measurement: W
-      id: wattage
-      filters:
-        - calibrate_linear:
-            # Map 0.0 (from sensor) to 0.0 (true value)
-            - 0.0 -> 0.0 #Need to keep 0 mapped to 0 for when connected device is not drawing any power
-            - 1379.1 -> 200.0 # Tested outdoor fountain pump via Kill-A-Watt
-            - 2816.9 -> 411.0 # Tested blow-dryer low via Kill-A-Watt
-            - 9250.6 -> 1341.0 # Tested water boiler via Kill-A-Watt
-            - 10736.7 -> 1562.0 # Tested blow-dryer high via Kill-A-Watt
-    current:
-      name: ${friendly_name} Current
-      unit_of_measurement: A
-      filters:
-        - calibrate_linear:
-            # Map 0.0 (from sensor) to 0.0 (true value)
-            - 0.0 -> 0.0 #Need to keep 0 mapped to 0 for when connected device is not drawing any power
-            - 2.07 -> 1.67 # Tested outdoor fountain pump via Kill-A-Watt
-            - 4.18 -> 3.41 # Tested blow-dryer low via Kill-A-Watt
-            - 14.37 -> 11.64 # Tested water boiler via Kill-A-Watt
-            - 16.26 -> 13.12 # Tested blow-dryer high via Kill-A-Watt
-    voltage:
-      name: ${friendly_name} Voltage
-      unit_of_measurement: V
-      filters:
-        - calibrate_linear:
-            # Map 0.0 (from sensor) to 0.0 (true value)
-            - 0.0 -> 0.0
-            - 355.9 -> 120.6 #Tested using a Kill-A-Watt meter, value while connected LED bulb was on
-    # change_mode_every: 3 # 1 - Skips first reading after each change, so this will double the update interval. Default 8
-    # update_interval: 3s # 10s - 20 second effective update rate for Power, 40 second for Current and Voltage. Default 60s
-
-# Reports the total Power so-far each day, resets at midnight, see https://esphome.io/components/sensor/total_daily_energy.html
-  - platform: total_daily_energy
-    name: ${friendly_name} Total Daily Energy
-    power_id: wattage
-    filters:
-        - multiply: 0.001  ## convert Wh to kWh
-    unit_of_measurement: kWh
-
-text_sensor:
-  - platform: version
-    name: "Fountain 1 ESPHome version"
+    number: GPIO5
+    inverted: true