Modularize and move all to kungle-oss.

_data/.common.yaml

@@ -0,0 +1,8 @@
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  # password: "38fdad38872738fe7c08f77643ed5d56"

_data/.esp32.yaml

@@ -0,0 +1,4 @@
+esphome:
+  name: "${device_name}"
+  platform: ESP32
+  board: esp32doit-devkit-v1

_data/.esp8266.yaml

@@ -0,0 +1,4 @@
+esphome:
+  name: "${device_name}"
+  platform: ESP8266
+  board: esp01_1m

_data/.gitignore

@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml

_data/.gosund-wp3.yaml

@@ -1,37 +1,3 @@
-substitutions:
-  device_name: r3-cpu-pwr
-  dn: r3_cpu_pwr
-  friendly_name: Rack3 Computer Power
-
-esphome:
-  name: "${device_name}"
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: !secret wifi_oss_ssid
-  password: !secret wifi_oss_pw
-  fast_connect: true
-
-  manual_ip:
-    static_ip: 192.168.35.248
-    gateway: 192.168.35.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "${device_name} Fallback Hotspot"
-    password: !secret wifi_fallback_pw
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  # password: !secret gosund_1_ota
-
 binary_sensor:
   - platform: gpio
     pin:

_data/.weather.yaml

@@ -0,0 +1,40 @@
+i2c:
+  sda: 4
+  scl: 5
+  scan: true
+  id: bus_a
+
+sensor:
+  - platform: bme280
+    temperature:
+      name: Temp${dn}
+      id: bme280_temperature
+    pressure:
+      name: Press${dn}
+      id: bme280_pressure
+    humidity:
+      name: HumidityRel${dn}
+      id: bme280_humidity
+    address: 0x76
+    update_interval: 15s
+  # Templates from https://esphome.io/cookbook/bme280_environment.html
+  - platform: template
+    name: HumidityAbs${dn}
+    lambda: |-
+      const float mw = 18.01534;    // molar mass of water g/mol
+      const float r = 8.31447215;   // Universal gas constant J/mol/K
+      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
+        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
+        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
+    accuracy_decimals: 2
+    update_interval: 15s
+    icon: 'mdi:water'
+    unit_of_measurement: 'g/m³'
+  - platform: template
+    name: DewPt${dn}
+    lambda: |-
+      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
+      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
+      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
+    unit_of_measurement: °C
+    icon: 'mdi:thermometer-alert'

_data/.wifi-oss.yaml

@@ -0,0 +1,9 @@
+wifi:
+  ssid: !secret wifi_oss_ssid
+  password: !secret wifi_oss_pw
+  use_address: "${device_name}"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${device_name}-fallback"
+    password: !secret wifi_fallback_pw

_data/fountain-1-light.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: fountain-1-light
+  dn: fountain_1_light
+  friendly_name: 1st Floor Fountain Light
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/fountain-1.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: fountain-1
+  dn: fountain_1
+  friendly_name: 1st Floor Fountain Pump
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/fountain-outside.yaml

@@ -1,33 +1,12 @@
 substitutions:
-  device_name: fountain_outside
+  device_name: fountain-outside
-  device_description: Energy Monitoring Smart Plug with button, blue LED, and red LED.
+  dn: fountain_outside
   friendly_name: Fountain Outside
+  device_description: Energy Monitoring Smart Plug with button, blue LED, and red LED.
 
-esphome:
+<<: !include .common.yaml
-  name: ${device_name}
+<<: !include .esp8266.yaml
-  platform: ESP8266
+<<: !include .wifi-oss.yaml
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.72
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-# Enable web server
-# web_server:
-#   port: 80
 
 # Enable time component for use by daily power sensor
 time:

_data/fountain_1.yaml

@@ -1,54 +0,0 @@
-esphome:
-  name: fountain_1
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.64
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "Fountain 1 button"
-    on_press:
-      - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Fountain 1 relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-sensor:
-  - platform: wifi_signal
-    name: "Fountain 1 WiFi signal"
-    update_interval: 60s
-
-  - platform: uptime
-    name: "Fountain 1 uptime"
-
-text_sensor:
-  - platform: version
-    name: "Fountain 1 ESPHome version"

_data/fountain_1_light.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: fountain_1_light
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.66
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "Fountain 1 Light button"
-    on_press:
-      - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Fountain 1 Light relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-sensor:
-  - platform: wifi_signal
-    name: "Fountain 1 Light WiFi signal"
-    update_interval: 60s
-
-  - platform: uptime
-    name: "Fountain 1 Light uptime"
-
-text_sensor:
-  - platform: version
-    name: "Fountain 1 Light ESPHome version"

_data/pj_3_duct_fan_pwr.yaml

@@ -1,83 +0,0 @@
-substitutions:
-  device_name: "pj_3_duct_fan_pwr"
-  friendly_name: "Prj 3 Duct Fan Pwr"
-
-esphome:
-  name: pj_3_duct_fan_pwr
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid:         "kungle-oss"
-  password:     "hcfU8@gG&8Hm"
-  fast_connect: true
-
-  manual_ip:
-    static_ip: 192.168.35.240
-    gateway:   192.168.35.1
-    subnet:    255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Pj 3 Duct Fan Pwr"
-    password: "ImgAxoEGSc90"
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "${friendly_name} Button"
-    id: "${device_name}_button"
-    on_press:
-      - switch.toggle: "${device_name}_relay"
-  - platform: status
-    name: "${friendly_name} Status"
-    id: "${device_name}_status"
-
-switch:
-  - platform: gpio
-    name: "${friendly_name} Relay"
-    id: "${device_name}_relay"
-    pin: GPIO14
-    on_turn_on:
-      - output.turn_on: led
-    on_turn_off:
-      - output.turn_off: led
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-output:
-  - platform: gpio
-    pin: GPIO13
-    inverted: true
-    id: led
-
-sensor:
-  - platform: wifi_signal
-    name: "${friendly_name} WiFi signal"
-    id: "${device_name}_wifi_signal"
-    update_interval: 60s
-  - platform: uptime
-    name: "${friendly_name} Uptime"
-    id: "${device_name}_uptime"
-    update_interval: 60s
-
-text_sensor:
-  - platform: version
-    name: "${friendly_name} ESPHome Version"
-    id: "${device_name}_esphome_version"

_data/prj-3.yaml

@@ -1,68 +1,56 @@
 substitutions:
+  device_name: prj-3
+  dn: prj_3
+  sn: P3
+  friendly_name: Prj 3
   duct_fan_pin: GPIO14
-  duct_fan_spd_name: Prj3 Duct Fan Speed
+  duct_fan_name: ${sn} Duct Fan Spd
-  duct_fan_target_spd_in_name: Prj3 Duct Fan Target Speed In
+  duct_fan_tgt_spd_in_name: ${sn} Duct Fan Tgt Spd In
-  duct_fan_target_spd_prj_name: Prj3 Duct Fan Target Speed Prj
+  duct_fan_tgt_spd_prj_name: ${sn} Duct Fan Tgt Spd Prj
-  duct_fan_target_spd_out_name: Prj3 Duct Fan Target Speed Out
+  duct_fan_tgt_spd_out_name: ${sn} Duct Fan Tgt Spd Out
   duct_fan_pwmfreq: 5000Hz
   duct_fan_off_spd: "0.0"
   duct_fan_lo_spd: "1.0"
   duct_fan_vent_spd: "50.0"
   duct_fan_hi_spd: "100.0"
-  prjpwr_pin:  GPIO19
+  prjpwr_pin: GPIO19
-  prjpwr_name: Prj3 Pwr
+  prjpwr_name: ${sn} Pwr
   dallas_pin: GPIO32
   dallas_in_addr: "0x1F3C01D0756F0928"
-  dallas_in_name: Prj3 Temp In
+  dallas_in_name: ${sn} Temp In
   dallas_prj_addr: "0x873C01D0756D4B28"
-  dallas_prj_name: Prj3 Temp Prj
+  dallas_prj_name: ${sn} Temp Prj
   dallas_out_addr: "0xA901143295610E28"
-  dallas_out_name: Prj3 Temp Out
+  dallas_out_name: ${sn} Temp Out
   dallas_update_interval: 30s
 
 globals:
-  - id: duct_fan_off_spd
+  - id: duct_fan_off_spd_id
     type: float
     initial_value: ${duct_fan_off_spd}
-  - id: duct_fan_lo_spd
+  - id: duct_fan_lo_spd_id
     type: float
     initial_value: ${duct_fan_lo_spd}
-  - id: duct_fan_vent_spd
+  - id: duct_fan_vent_spd_id
     type: float
     initial_value: ${duct_fan_vent_spd}
-  - id: duct_fan_hi_spd
+  - id: duct_fan_hi_spd_id
     type: float
     initial_value: ${duct_fan_hi_spd}
 
+<<: !include .common.yaml
+<<: !include .wifi-oss.yaml
+
 esphome:
   name: prj3
   platform: ESP32
   board: esp32doit-devkit-v1
-
+  on_boot:
-wifi:
+    - priority: 200.0
-  ssid: "kungle-oss"
+      then:
-  password: "hcfU8@gG&8Hm"
+        - output.set_level:
-  fast_connect: true
+            id: duct_fan_output_id
-
+            level: ${duct_fan_vent_spd}%
-  manual_ip:
-    static_ip: 192.168.35.192
-    gateway: 192.168.35.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Prj3 Fallback Hotspot"
-    password: "xfPfYSP3N0C3"
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
 
 switch:
   - platform: template
@@ -80,7 +68,7 @@ fan:
   - platform: speed
     id: duct_fan_spd_id
     output: duct_fan_output_id
-    name: ${duct_fan_spd_name}
+    name: ${duct_fan_name}
 
 dallas:
   - pin:
@@ -114,15 +102,15 @@ binary_sensor:
 
 number:
   - platform: template
-    id: duct_fan_target_spd_in
+    id: duct_fan_tgt_spd_in
-    name: ${duct_fan_target_spd_in_name}
+    name: ${duct_fan_tgt_spd_in_name}
     optimistic: true
     min_value: ${duct_fan_lo_spd}
     max_value: ${duct_fan_hi_spd}
     step: 1
   - platform: template
-    id: duct_fan_target_spd_prj
+    id: duct_fan_tgt_spd_prj
-    name: ${duct_fan_target_spd_prj_name}
+    name: ${duct_fan_tgt_spd_prj_name}
     min_value: ${duct_fan_off_spd}
     max_value: ${duct_fan_hi_spd}
     step: 1
@@ -140,10 +128,10 @@ number:
       lo_temp = id(thermostat_prj_id).target_temperature_low;
       hi_temp = id(thermostat_prj_id).target_temperature_high;
       curtemp = id(dallas_prj_id).state;
-      off_spd = id(duct_fan_off_spd);
+      off_spd = id(duct_fan_off_spd_id);
-      lo_spd = id(duct_fan_lo_spd);
+      lo_spd = id(duct_fan_lo_spd_id);
-      vent_spd = id(duct_fan_vent_spd);
+      vent_spd = id(duct_fan_vent_spd_id);
-      hi_spd = id(duct_fan_hi_spd);
+      hi_spd = id(duct_fan_hi_spd_id);
       ESP_LOGD("fan_speed", "DEBUG Ventilate House: %d", id(ventilate_house).state);
       ESP_LOGD("fan_speed", "DEBUG Current Temp: %f", curtemp);
       ESP_LOGD("fan_speed", "DEBUG Thermostat State: %d", id(thermostat_on_id).state);
@@ -154,9 +142,14 @@ number:
         call.perform();
         return off_spd;
       }
-      if (curtemp > hi_temp) {
+      if (std::isnan(curtemp)) {
+        ESP_LOGD("fan_speed", "DEBUG current temp unknown. Set spd to vent.");
+        newspd = vent_spd;
+      } else if (curtemp > hi_temp) {
         ESP_LOGD("fan_speed", "DEBUG curtemp > hi_temp");
         newspd = hi_spd;
+        } else if (curtemp < lo_temp) {
+        newspd = lo_spd;
       } else {
         // Set newspd to same linear proportion of spd range as current temp is of temp range
         newspd = lo_spd + ((hi_spd - lo_spd) * (curtemp - lo_temp) / (hi_temp - lo_temp));
@@ -178,8 +171,8 @@ number:
       call.perform();
       return newspd;
   - platform: template
-    id: duct_fan_target_spd_out
+    id: duct_fan_tgt_spd_out
-    name: ${duct_fan_target_spd_out_name}
+    name: ${duct_fan_tgt_spd_out_name}
     optimistic: true
     min_value: ${duct_fan_off_spd}
     max_value: ${duct_fan_hi_spd}
@@ -204,12 +197,12 @@ climate:
     min_heating_run_time: 60s
     min_idle_time: 60s
     heat_action:
-      - logger.log: "Turning off Prj3 Thermostat"
+      - logger.log: "Turning off ${friendly_name} Thermostat"
       - switch.turn_off: thermostat_on_id
     idle_action:
-      - logger.log: "Turning on Prj3 Thermostat"
+      - logger.log: "Turning on ${friendly_name} Thermostat"
       - switch.turn_on: thermostat_on_id
     cool_action:
-      - logger.log: "WARNING: Prj3 Thermostat has hit high temp!"
+      - logger.log: "WARNING: ${friendly_name} Thermostat has hit high temp!"
       - switch.turn_on: thermostat_on_id
       #TODO - provide some kind of warning / action here

_data/prj3-duct-fan-pwr.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: "prj3-duct-fan-pwr"
+  dn: "prj3_duct_fan_pwr"
+  friendly_name: "Prj 3 Duct Fan Pwr"
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/rack-2-df-pwr.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: rack-2-df-pwr
+  dn: rack_2_df_pwr
+  friendly_name: Rack 2 Duct Fan Power
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/rack-3-cpu-pwr.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: rack-3-cpu-pwr
+  dn: rack_3_cpu_pwr
+  friendly_name: Rack3 Computer Power
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/rack-3-df-pwr.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  device_name: rack-3-df-pwr
+  dn: rack_3_df_pwr
+  friendly_name: Rack 3 Duct Fan Power
+
+<<: !include .common.yaml
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
+
+<<: !include .gosund-wp3.yaml

_data/rack_2_duct_fan_pwr.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: rack_2_duct_fan_pwr
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.70
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-
-# binary_sensor:
-#   - platform: gpio
-#     pin:
-#       number: GPIO4
-#       mode: INPUT_PULLUP
-#       inverted: True
-#     name: "Rack 2 Duct Fan Power Button"
-#     on_press:
-#       - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Rack 2 Duct Fan Power Relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-# sensor:
-#   - platform: wifi_signal
-#     name: "Rack 2 Duct Fan Power WiFi Signal"
-#     update_interval: 60s
-
-#   - platform: uptime
-#     name: "Rack 2 Duct Fan Power uptime"
-
-# text_sensor:
-#   - platform: version
-#     name: "Rack 2 Duct Fan Power ESPHome Version"

_data/rack_3.yaml

@@ -39,6 +39,9 @@ globals:
     type: float
     initial_value: ${duct_fan_hi_spd}
 
+<<: !include .common.yaml
+<<: !include .wifi-oss.yaml
+
 esphome:
   name: rack_3
   platform: ESP32
@@ -50,30 +53,6 @@ esphome:
             id: duct_fan_output_id
             level: ${duct_fan_vent_spd}%
 
-wifi:
-  ssid: "kungle-ot"
-  password: "ThingsWelcomeToKungle"
-
-  manual_ip:
-    static_ip: 192.168.37.74
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Rack 3 Fallback Hotspot"
-    password: "jj0CXEgu3Lzo"
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
 switch:
   - platform: template
     name: Thermostat On

_data/rack_3_duct_fan_pwr.yaml

@@ -1,55 +0,0 @@
-esphome:
-  name: rack_3_duct_fan_pwr
-  platform: ESP8266
-  board: esp01_1m
-
-wifi:
-  ssid: kungle-ot
-  password: ThingsWelcomeToKungle
-
-  manual_ip:
-    static_ip: 192.168.37.68
-    gateway: 192.168.37.1
-    subnet: 255.255.255.0
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-
-
-# binary_sensor:
-#   - platform: gpio
-#     pin:
-#       number: GPIO4
-#       mode: INPUT_PULLUP
-#       inverted: True
-#     name: "Rack 3 Duct Fan Power Button"
-#     on_press:
-#       - switch.toggle: relay
-
-switch:
-  - platform: gpio
-    name: "Rack 3 Duct Fan Power Relay"
-    pin: GPIO14
-    id: relay
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-# sensor:
-#   - platform: wifi_signal
-#     name: "Rack 3 Duct Fan Power WiFi Signal"
-#     update_interval: 60s
-
-#   - platform: uptime
-#     name: "Rack 3 Duct Fan Power uptime"
-
-# text_sensor:
-#   - platform: version
-#     name: "Rack 3 Duct Fan Power ESPHome Version"

_data/tv1-cpu-pwr.yaml

@@ -3,76 +3,8 @@ substitutions:
   dn: tv1_cpu_pwr
   friendly_name: 1st Floor TV Computer Power
 
-esphome:
+<<: !include .common.yaml
-  name: "${device_name}"
+<<: !include .esp8266.yaml
-  platform: ESP8266
+<<: !include .wifi-oss.yaml
-  board: esp01_1m
 
-wifi:
+<<: !include .gosund-wp3.yaml
-  ssid: !secret wifi_oss_ssid
-  password: !secret wifi_oss_pw
-  use_address: "${device_name}"
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "${device_name}-fallback"
-    password: !secret wifi_fallback_pw
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  # password: !secret gosund_1_ota
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: GPIO4
-      mode: INPUT_PULLUP
-      inverted: True
-    name: "${friendly_name} Button"
-    id: "${dn}_button"
-    on_press:
-      - switch.toggle: "${dn}_relay"
-  - platform: status
-    name: "${friendly_name} Status"
-    id: "${dn}_status"
-
-switch:
-  - platform: gpio
-    name: "${friendly_name} Relay"
-    id: "${dn}_relay"
-    pin: GPIO14
-    on_turn_on:
-      - output.turn_on: led
-    on_turn_off:
-      - output.turn_off: led
-
-status_led:
-  pin:
-    number: GPIO12
-    inverted: yes
-
-output:
-  - platform: gpio
-    pin: GPIO13
-    inverted: true
-    id: led
-
-sensor:
-  - platform: wifi_signal
-    name: "${friendly_name} WiFi signal"
-    id: "${dn}_wifi_signal"
-    update_interval: 60s
-  - platform: uptime
-    name: "${friendly_name} Uptime"
-    id: "${dn}_uptime"
-    update_interval: 60s
-
-text_sensor:
-  - platform: version
-    name: "${friendly_name} ESPHome Version"
-    id: "${dn}_esphome_version"

_data/weather-in-1.yaml

@@ -1,74 +1,9 @@
 substitutions:
-  device_name: In1
+  device_name: weather-in-1
+  dn: In1
 
-esphome:
+<<: !include .common.yaml
-  name: weather-in-1
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
 
-esp8266:
+<<: !include .weather.yaml
-  board: esp01_1m
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  # password: "38fdad38872738fe7c08f77643ed5d56"
-
-wifi:
-  ssid: !secret wifi_oss_ssid
-  password: !secret wifi_oss_password
-
-  manual_ip:
-    static_ip: 192.168.35.246
-    gateway: 192.168.35.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Weather-Out-S Fallback Hotspot"
-    password: "0xINHxW0IbSK"
-
-captive_portal:
-
-i2c:
-  sda: 4
-  scl: 5
-  scan: true
-  id: bus_a
-
-sensor:
-  - platform: bme280
-    temperature:
-      name: Temp${device_name}
-      id: bme280_temperature
-    pressure:
-      name: Press${device_name}
-      id: bme280_pressure
-    humidity:
-      name: HumidityRel${device_name}
-      id: bme280_humidity
-    address: 0x76
-    update_interval: 15s
-  # Templates from https://esphome.io/cookbook/bme280_environment.html
-  - platform: template
-    name: HumidityAbs${device_name}
-    lambda: |-
-      const float mw = 18.01534;    // molar mass of water g/mol
-      const float r = 8.31447215;   // Universal gas constant J/mol/K
-      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
-        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
-        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
-    accuracy_decimals: 2
-    update_interval: 15s
-    icon: 'mdi:water'
-    unit_of_measurement: 'g/m³'
-  - platform: template
-    name: DewPt${device_name}
-    lambda: |-
-      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
-      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
-      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
-    unit_of_measurement: °C
-    icon: 'mdi:thermometer-alert'

_data/weather-out-n.yaml

@@ -1,74 +1,9 @@
 substitutions:
-  device_name: OutN
+  device_name: weather-out-n
+  dn: OutN
 
-esphome:
+<<: !include .common.yaml
-  name: weather-out-n
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
 
-esp8266:
+<<: !include .weather.yaml
-  board: esp01_1m
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  # password: "38fdad38872738fe7c08f77643ed5d56"
-
-wifi:
-  ssid: !secret wifi_oss_ssid
-  password: !secret wifi_oss_password
-
-  manual_ip:
-    static_ip: 192.168.35.244
-    gateway: 192.168.35.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Weather-Out-S Fallback Hotspot"
-    password: "0xINHxW0IbSK"
-
-captive_portal:
-
-i2c:
-  sda: 4
-  scl: 5
-  scan: true
-  id: bus_a
-
-sensor:
-  - platform: bme280
-    temperature:
-      name: Temp${device_name}
-      id: bme280_temperature
-    pressure:
-      name: Press${device_name}
-      id: bme280_pressure
-    humidity:
-      name: HumidityRel${device_name}
-      id: bme280_humidity
-    address: 0x76
-    update_interval: 15s
-  # Templates from https://esphome.io/cookbook/bme280_environment.html
-  - platform: template
-    name: HumidityAbs${device_name}
-    lambda: |-
-      const float mw = 18.01534;    // molar mass of water g/mol
-      const float r = 8.31447215;   // Universal gas constant J/mol/K
-      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
-        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
-        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
-    accuracy_decimals: 2
-    update_interval: 15s
-    icon: 'mdi:water'
-    unit_of_measurement: 'g/m³'
-  - platform: template
-    name: DewPt${device_name}
-    lambda: |-
-      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
-      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
-      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
-    unit_of_measurement: °C
-    icon: 'mdi:thermometer-alert'

_data/weather-out-s.yaml

@@ -1,74 +1,9 @@
 substitutions:
-  device_name: OutS
+  device_name: weather-out-s
+  dn: OutS
 
-esphome:
+<<: !include .common.yaml
-  name: weather-out-s
+<<: !include .esp8266.yaml
+<<: !include .wifi-oss.yaml
 
-esp8266:
+<<: !include .weather.yaml
-  board: esp01_1m
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  # password: "38fdad38872738fe7c08f77643ed5d56"
-
-wifi:
-  ssid: !secret wifi_oss_ssid
-  password: !secret wifi_oss_password
-
-  manual_ip:
-    static_ip: 192.168.35.242
-    gateway: 192.168.35.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Weather-Out-S Fallback Hotspot"
-    password: "0xINHxW0IbSK"
-
-captive_portal:
-
-i2c:
-  sda: 4
-  scl: 5
-  scan: true
-  id: bus_a
-
-sensor:
-  - platform: bme280
-    temperature:
-      name: Temp${device_name}
-      id: bme280_temperature
-    pressure:
-      name: Press${device_name}
-      id: bme280_pressure
-    humidity:
-      name: HumidityRel${device_name}
-      id: bme280_humidity
-    address: 0x76
-    update_interval: 15s
-  # Templates from https://esphome.io/cookbook/bme280_environment.html
-  - platform: template
-    name: HumidityAbs${device_name}
-    lambda: |-
-      const float mw = 18.01534;    // molar mass of water g/mol
-      const float r = 8.31447215;   // Universal gas constant J/mol/K
-      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
-        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
-        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
-    accuracy_decimals: 2
-    update_interval: 15s
-    icon: 'mdi:water'
-    unit_of_measurement: 'g/m³'
-  - platform: template
-    name: DewPt${device_name}
-    lambda: |-
-      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
-      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
-      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
-    unit_of_measurement: °C
-    icon: 'mdi:thermometer-alert'