substitutions:
  device_name: "pj_3_duct_fan_pwr"
  friendly_name: "Prj 3 Duct Fan Pwr"

esphome:
  name: pj_3_duct_fan_pwr
  platform: ESP8266
  board: esp01_1m

wifi:
  ssid:         "kungle-oss"
  password:     "hcfU8@gG&8Hm"
  fast_connect: true

  manual_ip:
    static_ip: 192.168.35.240
    gateway:   192.168.35.1
    subnet:    255.255.255.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Pj 3 Duct Fan Pwr"
    password: "ImgAxoEGSc90"

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO4
      mode: INPUT_PULLUP
      inverted: True
    name: "${friendly_name} Button"
    id: "${device_name}_button"
    on_press:
      - switch.toggle: "${device_name}_relay"
  - platform: status
    name: "${friendly_name} Status"
    id: "${device_name}_status"

switch:
  - platform: gpio
    name: "${friendly_name} Relay"
    id: "${device_name}_relay"
    pin: GPIO14
    on_turn_on:
      - output.turn_on: led
    on_turn_off:
      - output.turn_off: led

status_led:
  pin:
    number: GPIO12
    inverted: yes

output:
  - platform: gpio
    pin: GPIO13
    inverted: true
    id: led

sensor:
  - platform: wifi_signal
    name: "${friendly_name} WiFi signal"
    id: "${device_name}_wifi_signal"
    update_interval: 60s
  - platform: uptime
    name: "${friendly_name} Uptime"
    id: "${device_name}_uptime"
    update_interval: 60s

text_sensor:
  - platform: version
    name: "${friendly_name} ESPHome Version"
    id: "${device_name}_esphome_version"