esphome

esp32

docs

Just start with an existing yaml, such as base_esp32.yaml.

Plug it in to laptop, then run:

docker run --rm -v "${PWD}":/config --device=/dev/ttyUSB0 -it esphome/esphome base_esp32.yaml run

Then set static IP in router. Then in esphome on server create same thing, add static IP block, then upload. Should now be online.

Hardware

irf520

pin-out

1 x 3 Male Header

SIG = Signal input (active HIGH). Typically used with 5V logic. Can be driven at up to 10V to fully turn on the IRF520. VCC = No connection GND = Digital ground.

1 x 2 Screw Terminal (Load)

V+ = Connect to positive lead of load (motor, LEDs, fan, etc) V- = Connect to negative lead of load

1 x 2 Screw Terminal (Power)

VIN = Connect to power supply (0-24V) being used to power the load GND = Connect to power supply ground